J. C. Gupta & Sons

A Spacer also known as a Standoff is a fastener that is used to create space between two objects, often to properly position them. In the world of electronic compenents and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears. Standoffs can be round, hexagonal or square in shape. These are Female-Female type. Standoffs are available in a variety of materials including aluminum, brass, plastic, steel and stainless steel.
This range is with internal threads and made from Black Nylon.
Range available is from M2.5 to M4. Extended range on special orders.

Additional Information:

• Item Code: K3C11

Spacers and Standoffs are two common types of positioning electronic hardware. Look inside an assembled circuit board, and you will be greeted by a bevy of Standoffs and Spacers, because in the world of Electronic Hardware, they are the standard for connecting and mounting circuit boards, panels, doors, and gears providing sturdy support and alignment.

Both are commonly used to properly position parts within an assembly, to reduce component contact, to elevate stacked sections, to ensure enough room for heat to dissipate, and to separate or create space between two objects.

A standoff is a threaded separator of defined length used to raise one assembly above another.

They are usually round or hex (for wrench tightening), often made of aluminum, brass, or nylon, and come in male-female or female-female forms. In electronics they are frequently used to raise a printed-circuit board above a surface.

Through Internal Threaded Hex Standoff [Female-Female Standoffs]

These are Internal Threaded Female-Female Spacers and are available in Brass-Nickel coated, Nylon and Stainless Steel.

Other options on special order.

Suitable for using with screws at both ends providing a clean finish.
Advantages – Standoffs are usually chosen over spacers when longer sizes are required. Hex standoffs can be installed with a nut-setter or other wrenching device.
Now developed in Marine Grade Stainless Steel A4 SS-416.
Range - M2 to M4.

View our webpages at https://www.jcfasteners.com for up to date product and datasheet information

Additional Information:

• Item Code: B6C11

An Externally threaded Spacer also known as a Standoff is a fastener that is used to create space between two objects, often to properly position them. In the world of electronic compenents and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears. Standoffs can be round, hexagonal or square in shape. These are Male-Female type. Standoffs are available in a variety of materials including aluminum, brass, plastic, steel and stainless steel.
Our range of Stainless Steel Male-Female Standoffs are made from AISI 303 and on request AISI-316 can be provided.
The range starts from M2 up to M5 and many sizes are available in ready stock. Now also available in Unified Series - UNC4-40 to UNF 10-32
Customisation is also possible

Additional Information:

• Item Code: B3C12

Spacers and Standoffs are two common types of positioning electronic hardware. Look inside an assembled circuit board, and you will be greeted by a bevy of Standoffs and Spacers, because in the world of Electronic Hardware, they are the standard for connecting and mounting circuit boards, panels, doors, and gears providing sturdy support and alignment.

Both are commonly used to properly position parts within an assembly, to reduce component contact, to elevate stacked sections, to ensure enough room for heat to dissipate, and to separate or create space between two objects. These guys are workhorses!

Male-Female Standoffs

These have one end with a male thread and the other end has a female thread.

These are excellent for use when stacking circuit boards as each male thread can be installed into the mating part’s female thread.

This quickly reduces the number of fasteners needed in the assembly while also reducing installation time.

Selection Guide

When designing and choosing a Standoff for your next application, it is easiest to think of standoffs as 3 separate sections; the two threaded ends and the main body.

.T. Spacers [Male-Female Spacers]

 

These are Internal-External Threaded Spacers. Standoffs can be round, hexagonal or square in shape. These are Male-Female type.

 

Male-female standoffs are used for printed circuit board mounting and other applications requiring close controls of dimensions.

 

Standoffs are available in a variety of materials including aluminium, brass, plastic, steel and stainless steel. 

 

Our range of Stainless Steel Male-Female Standoffs are made from AISI 303 and on request AISI-316 can be provided.
Our newest development is marine grade A4 AISI-316. Now available from M2 to M4.

 

Additional Information:

• Item Code: B6C12

Spacers and Standoffs are two common types of positioning electronic hardware. Look inside an assembled circuit board, and you will be greeted by a bevy of Standoffs and Spacers, because in the world of Electronic Hardware, they are the standard for connecting and mounting circuit boards, panels, doors, and gears providing sturdy support and alignment.

Both are commonly used to properly position parts within an assembly, to reduce component contact, to elevate stacked sections, to ensure enough room for heat to dissipate, and to separate or create space between two objects. These guys are workhorses!

Male-Female Standoffs

These have one end with a male thread and the other end has a female thread.

These are excellent for use when stacking circuit boards as each male thread can be installed into the mating part’s female thread.

This quickly reduces the number of fasteners needed in the assembly while also reducing installation time.

Selection Guide

When designing and choosing a Standoff for your next application, it is easiest to think of standoffs as 3 separate sections; the two threaded ends and the main body.

E.T. Spacers [Male-Female Spacers]

 

These are Internal-External Threaded Spacers. Standoffs can be round, hexagonal or square in shape. These are Male-Female type.

 

Male-female standoffs are used for printed circuit board mounting and other applications requiring close controls of dimensions.

 

Standoffs are available in a variety of materials including aluminium, brass, plastic, steel and stainless steel. 

 

Our range of Nylon Male-Female Standoffs facilitates to reduce component weight and also electrical insulation.

Available in various thicknesses.

The default is Nylon with a Metal Insert.

A limited range is available in full Nylon.

This is useful for high insulation and extremely low weight.

An Externally threaded Spacer also known as a Standoff is a fastener that is used to create space between two objects, often to properly position them. In the world of electronic compenents and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears. Standoffs can be round, hexagonal or square in shape. These are Male-Female type. Standoffs are available in a variety of materials including aluminum, brass, plastic, steel and stainless steel.
The option with Brass is Nickel coated. Range is from M2 to M5 with length up to 50mm.

Additional Information:

• Item Code: D2C12

A Spacer also known as a Standoff is a fastener that is used to create space between two objects, often to properly position them. In the world of electronic compenents and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears. Standoffs can be round, hexagonal or square in shape. These are Female-Female type. Standoffs are available in a variety of materials including aluminum, brass, plastic, steel and stainless steel.
This range is with internal threads and made from Brass with Nickel coating.
Range available is from M2 to M4. M5 on special orders.

Additional Information:

• Item Code: D2C11

Spacers are  a type of positioning electronic hardware. They provide sturdy support, alignment and spacing to a variety of applications such as circuit board assemblies, panels and doors.
A Spacer also known as a Standoff is a fastener that is used to create space between two objects, often to properly position them. In the world of electronic compenents and electronic hardware, standoffs are typically used to space circuit boards, panels, doors or gears.
These Round Unthreaded Spacers can be used for separation and insulation as well.
Our range is from 2.5mm to 5mm

Additional Information:

• Item Code: K3C18

pacers and Standoffs are two common types of positioning electronic hardware. Look inside an assembled circuit board, and you will be greeted by a bevy of Standoffs and Spacers, because in the world of Electronic Hardware, they are the standard for connecting and mounting circuit boards, panels, doors, and gears providing sturdy support and alignment.

Both are commonly used to properly position parts within an assembly, to reduce component contact, to elevate stacked sections, to ensure enough room for heat to dissipate, and to separate or create space between two objects.

Unthreaded Spacers 

Spacers are fasteners used to connect, separate, or position parts in assemblies. They provide sturdy support, alignment and spacing to a variety of applications such as circuit board assemblies, panels and doors.

 

The hollow body of a spacer is designed to allow the shaft of a screw to pass completely through it before entering the surface material. This forces a gap to be kept between the screw head and the material or component below, while still allowing the fastener to be properly torqued.

 

They are generally installed over the top of screws to space out or stack circuit boards or paneling. Spacers can be stacked to cover longer screws if needed.

Female unthreaded round circuit board spacers do not have threads and resemble a plain, cylindrical tube.

These Round Unthreaded Spacers can be used for separation and insulation as well.
Range is from 2mm till 6mm

 

Additional Information:

• Item Code: B3C18