J. C. Gupta & Sons

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The open end, FULL HEX Body provides a maximum resistance to torque out loads. With Reduced CSK collar a flush fixing is achieved.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: A2C65

Blind rivet nuts and blind rivet studs are threaded inserts. They are a one-piece internally threaded and counterbored tubular rivet that can be anchored entirely from one side. These are suited for sheet metal, pipes, and other industrial fastening needs. It’s applications include areas requiring a strong but non-permanent connection.
The open end, round body with large flange is the most versatile and simplest to use form and is suitable for many applications.

Blind rivet nuts and blind rivet studs are threaded inserts. They are a one-piece internally threaded and counterbored tubular rivet that can be anchored entirely from one side. These are suited for sheet metal, pipes, and other industrial fastening needs. It’s applications include areas requiring a strong but non-permanent connection.
The open end, round body with Small CSK is fast becoming a very useful profile due to its ability to produce a fluch installation without requiring a countersunk hole.

The split blind nut is very useful for installing internal threads in thin sheets and softer materials.

Characteristics

• large grip range for diverse material thickness

• particularly suitable for mounting of soft and brittle materials

• high torsional strength on rough material surfaces

• quick and easy assembly

 

Applications

• Automotive industry

• Wood and plastics processing industry

• Interior fitting of commercial vehicles

• Acoustic and dry construction

• Air conditioning and refrigerating technology

• Apparatus and tank construction and many more

 A High Quality product from Goebel

Steel Zinc Plated

Additional Information:

• Item Code: A2C47G

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - 'blind application'
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The FULL HEX body provides maximum resistance to torsion failure and Large Flange collar excellent push out resistance.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: A2C63

We have a wide range of blind nuts available in stock.

Blind Nuts are available in the following design options.

Body Types - Open End Blind Nut and Closed End Blind Nut

Bode Shapes - Round Blind Nut, Semi-Hex Blind Nut and Full-Hex Blind Nut

Head Styles - Flat Head Blind Nut or Large Flange Blind Nut or LF, Countersunk Blind Nut or CSK Blind Nut, Small CSK Blind Nut or Reduced CSK Blind Nut or RCSK Blind Nut

Blind Nuts are available in the following material options.

• Stainless Steel AISI 304 A2
• Stainless Steel AISI 316 A6
• Zinc Coated Mild Steel
• Aluminium Blind Nut
• Neopren Blind Nut

We also have Special Split Nuts in stock.

This design - Half Hex reduced head profile is quite useful.
The hex body resists turning of the nut during application of torque for which a hexagonal hole is required to be punched in the sheet before installation.
And the nut has a reduced head lip which provides a flush finish thus enabling other parts to abut the surface. This is a useful feature for a number of architectural requirements.
The rivets are manufactured from Steel and have a Trivalent Zinc Coating making them ROHS compliant.

Available in ready stock.
Sizes M3 to M12

Additional Information:

• Item Code: A2C44

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The open end, round body with large flange is the most versatile and simplest to use form and is suitable for many applications.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: B4C41
• Pay Mode Terms: T/T (Bank Transfer)

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The open end, round body with reduced CSK or reduced collar is used to provide a flush fitting.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: A2C42

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The Closed End type is used to provide the critical seal that keeps gas and liquid from escaping through the fastening part. It also avoids contact with mechanical components and electrical wiring.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: B4C50

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The Closed End type is used to provide the critical seal that keeps gas and liquid from escaping through the fastening part. It also avoids contact with mechanical components and electrical wiring.
The Reduced CSK profile provides for a flush fixing.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: B4C63

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The open end, Countersunk [CSK] is used to provide a flush fitting.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: B4C68

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

The open end, Countersunk [CSK] is used to provide a flush fitting.

Avaliable in sizes M3 to M12

Additional Information:

• Item Code: B2C41G
• Delivery Time: EX STOCK

Blind rivet nuts and blind rivet studs are threaded inserts. They are a one-piece internally threaded and counterbored tubular rivet that can be anchored entirely from one side. These are suited for sheet metal, pipes, and other industrial fastening needs. It’s applications include areas requiring a strong but non-permanent connection.

The most common sectors include the automotive, white goods, heating and air conditioning, solar fixings, electronics and construction industries. Advantages of using Blind Rivet Nuts

The open end, Semi-Hex Large Flange Body type provides a very strong nut attachment with high torque and push out loads.

Avaliable in sizes M3 to M12

Additional Information:

• Item Code: B2C43G

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.
The open end, round body with reduced CSK or reduced collar is used to provide a flush fitting.

Avaliable in sizes M3 to M12

Additional Information:

• Item Code: B2C42G

Additional Information:

• Item Code: F39

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The open end, Semi-Hex Large Flange Body type provides a very strong nut attachment with high torque and push out loads.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: B4C43
• Pay Mode Terms: T/T (Bank Transfer)

Blind rivet nuts are single-part hollow-thread nuts which are installed from a single side without the need for reworking.
They therefore represent an efficient and impressive solution for installing a thread on thin sheets.
They can also be applied in a combination of riveting and additional screw fastenings. A resilient thread is produced as a result, especially on thin components and hollow sections. The pronounced rivet beading on the rear side guarantees a high tear-out strength.

Advantages
Can be installed from a single side - ''blind application''
High tear-out strength as the result of pronounced rivet beading.
Use on surface-treated parts possible
Efficient processing with manual or pneumatic-hydraulic tools

Uses
- Commercial Vehicles, Cars and Two Wheelers. Bumpers, safety belts, airbags etc.
- Electrical and Electronic Products, Safety cabinets, Furniture, Air Conditioning etc.
- Food Processing industry. Ovens, chimneys, heating, boilers etc.
- Building and civil engineering, climbing walls, rail coaches etc.

The open end, Semi Hex body with reduced CSK or reduced collar is used to provide a flush fitting.

Avaliable in sizes M3 to M12
Materials - Steel Zinc Coated, Stainless Steel and Aluminium

Additional Information:

• Item Code: B4C44
• Pay Mode Terms: T/T (Bank Transfer)

High performance Rivet Nut Manual Tool.
Lever Type. Heavy Duty from GOEBEL.
For all materials.

Additional Information:

• Item Code: Q1F4151000G
• Delivery Time: EX STOCK

High performance Hydro-Pneumatic Blind Nut Riveter from GOEBEL.
Range - M3 to M12
An extremely reliable tool.

Additional Information:

• Item Code: Q1F4204000G
• Delivery Time: EX STOCK

High Quality Hand Riveting Tool for Blind Rivet Nuts.
Plier Type from GOEBEL.

Additional Information:

• Item Code: Q1F4135000G
• Delivery Time: EX STOCK