J. C. Gupta & Sons

Set Screws are blind (headless) fasteners with an internal hex drive. It is this drive style that classifies stainless steel screws in this selection as set screws, which are driven by a hex bit or Allen wrench. Grub Screws are used in a tapped hole and tightened to hold an exterior object in place within or against another object, via friction between the point or end of the screw and the material that is being fastened.

Set Screws are also often used in applications where a flush installation and the look of the final assembly are important, such as furniture assembly. Socket Set Screws will run flush with the installation surface. They are often plugged after installation for a hidden fastener look. These qualities are what make set screws commonly used in applications where a flat surface is important, such as handles, grips, surfboard fins, and furniture or machine assembly. Because a flush surface is important on complex machines, Set Screws are also commonly used in gears, pulleys, and wheel in machines with moving parts.

A stainless steel set screw is a type of screw generally used to secure an object within or against another object. The most common examples are securing a pulley or gear to a shaft. A blind set screw (known in the UK as a grub screw, quite possibly from its figurative resemblance to a soil-dwelling grub) is almost always driven with an internal-wrenching drive, such as a hex socket (Allen) socket. The set screw passes through a threaded hole in the outer object and is tightened against the inner object to prevent it from moving relative to the outer object. It exerts compression or clamping force through the bottom tip that projects through the hole.

Available with points including Cup Point, Cone Point, Flat Point and Dog Point.

 

One might often need to use a flat point when the screw must press perfectly flat against a surface.

Socket Set Screws (Grub Screws) SS, DIN 913, ISO 4026

Confirming to IS: 6094-1

Threads: ISO metric coarse series 4g6g as per IS 4218, ISO 261, ISO 965. Standard thread lengths.

Materials: Stainless Steel (SS)

Size Range : (M2),( M2.5), M3, M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20,

Lengths – from 2mm to 100 mm.

Sizes in brackets are non-preferred standards and availability is limited.

Additional Information:

• Item Code: B4A06

 

Set Screws are blind (headless) fasteners with an internal hex drive. It is this drive style that classifies stainless steel screws in this selection as set screws, which are driven by a hex bit or Allen wrench. Grub Screws are used in a tapped hole and tightened to hold an exterior object in place within or against another object, via friction between the point or end of the screw and the material that is being fastened.

Set Screws are also often used in applications where a flush installation and the look of the final assembly are important, such as furniture assembly. Socket Set Screws will run flush with the installation surface. They are often plugged after installation for a hidden fastener look. These qualities are what make set screws commonly used in applications where a flat surface is important, such as handles, grips, surfboard fins, and furniture or machine assembly. Because a flush surface is important on complex machines, Set Screws are also commonly used in gears, pulleys, and wheel in machines with moving parts.

The set screw passes through a threaded hole in the outer object and is tightened against the inner object to prevent it from moving relative to the outer object. It exerts compression or clamping force through the bottom tip that projects through the hole.

Available with points including Cup Point, Cone Point, Flat Point and Dog Point.

Dog Point

They are used for permanent location of one part to another. They have flat end with the threads stopping short of the end.

The tip is normally located into a groove in a shaft and allows the shaft to rotate whilst retaining the part in place.

The end is spotted in hole drilled in shaft or against flat (milled). They often replace dowel pins. Works well against hardened members or hollow tubing.

Available in ISO 4028 or DIN 915

Additional Information:

• Item Code: B4A08

The Socket Button Head Screw design as per ISO 7380-1 is primarily used where a lower profile head is required and for aesthetical reasons.

Button head socket cap screws combine the similar shape of a pan head with the driver of a socket head. The socket driver is ideal for low clearance applications that require a large area clamping face.

Compared to a standard socket head cap screw, button heads have a lower and wider profile which can be useful when the clamping material is too thin to counter-bore. A button head socket cap screw's large diameter face also helps to distribute force more evenly.

The Torx compatible drive is a reliable method of fixing screws. This drive can take more torque and does not slip.

The hexalobular socket screw drive, known as Torx or 6-Lobe or star drive, uses a star-shaped recess in the fastener with six rounded points.

Additional Information:

• Item Code: B4A29

The Socket Button Head Screw design as per ISO 7380-1 is primarily used where a lower profile head is required and for aesthetical reasons.

Button head socket cap screws combine the similar shape of a pan head with the driver of a socket head. The socket driver is ideal for low clearance applications that require a large area clamping face.

Compared to a standard socket head cap screw, button heads have a lower and wider profile which can be useful when the clamping material is too thin to counter-bore. A button head socket cap screw's large diameter face also helps to distribute force more evenly.

The Torx compatible drive is a reliable method of fixing screws. This drive can take more torque and does not slip.

The hexalobular socket screw drive, known as Torx or 6-Lobe or star drive, uses a star-shaped recess in the fastener with six rounded points.

Stainless Steel Grade AISI 316 A4 provides excellent corrosion resistance making it ideal for marine applications. It is also know as food grade stainless steel and is very useful in food processing, Pharmaceutical and Chemical industries.

Additional Information:

• Item Code: B6A29

These are protective fasteners which provide the assembly with structural support as well as a visually appealing look. It protects the components around it from damages like scraps and unintentional cuts.

Another advantage of these screws is the large under head bearing surface - this eliminates the need for washers. The Flange distributes the pressure better.

These also have a low profile head which facilitates space saving and safety.

Stainless Steel Grade AISI 316 A4 provides excellent corrosion resistance making it ideal for marine applications. It is also know as food grade stainless steel and is very useful in food processing, Pharmaceutical and Chemical industries.

Additional Information:

• Item Code: B6A33

These are protective fasteners which provide the assembly with structural support as well as a visually appealing look. It protects the components around it from damages like scraps and unintentional cuts.

Another advantage of these screws is the large under head bearing surface - this eliminates the need for washers. The Flange distributes the pressure better.

These also have a low profile head which facilitates space saving and safety.

Additional Information:

• Item Code: B4A33

Socket Set Screws (Grub Screws) SS, DIN 916, ISO 4029

Confirming to IS: 6094-4

Threads: ISO metric coarse series 4g6g as per IS 4218, ISO 261, ISO 965. Standard thread lengths.

Materials: Stainless Steel (SS)

Size Range : (M2),( M2.5), M3, M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20,

Lengths – from 2mm to 100 mm.

Sizes in brackets are non-preferred standards and availability is limited.

Additional Information:

• Item Code: B4A07

The Socket Torx cap screws are made according to ISO 14579.
Ensuring a wobble free fixing, the TX drive is the prime feature of this screw.
Available in Stainless Steel AISI 304 Grade A2.
Size Range : M3 to M12

Additional Information:

• Item Code: B4A19

These are protective fasteners which provide the assembly with structural support as well as a visually appealing look. It protects the components around it from damages like scraps and unintentional cuts.

Another advantage of these screws is the large under head bearing surface - this eliminates the need for washers. The Flange distributes the pressure better.

These also have a low profile head which facilitates space saving and safety.

The Torx compatible drive is a reliable method of fixing screws. This drive can take more torque and does not slip.

The hexalobular socket screw drive, known as Torx or 6-Lobe or star drive, uses a star-shaped recess in the fastener with six rounded points.

Additional Information:

• Item Code: B4A34

The Socket Button Head Screw design as per ISO 7380-1 is primarily used where a lower profile head is required and for aesthetical reasons.

Button head socket cap screws combine the similar shape of a pan head with the driver of a socket head. The socket driver is ideal for low clearance applications that require a large area clamping face.

Compared to a standard socket head cap screw, button heads have a lower and wider profile which can be useful when the clamping material is too thin to counter-bore. A button head socket cap screw's large diameter face also helps to distribute force more evenly.

These screws can take a lower tightening torque as compared to the DIN 912 screws.  

Hence, these screws are not recommended for high demand applications.

Available in Hexagonal Socket drive and 6-Lobe (Hexalobular) drive for higher reliability.

Stainless Steel Grade AISI 316 A4 provides excellent corrosion resistance making it ideal for marine applications. It is also know as food grade stainless steel and is very useful in food processing, Pharmaceutical and Chemical industries.

Additional Information:

• Item Code: B6A04

The Socket Button Head Screw design as per ISO 7380-1 is primarily used where a lower profile head is required and for aesthetical reasons.

Button head socket cap screws combine the similar shape of a pan head with the driver of a socket head. The socket driver is ideal for low clearance applications that require a large area clamping face.

Compared to a standard socket head cap screw, button heads have a lower and wider profile which can be useful when the clamping material is too thin to counter-bore. A button head socket cap screw's large diameter face also helps to distribute force more evenly.

These screws can take a lower tightening torque as compared to the DIN 912 screws.  

Hence, these screws are not recommended for high demand applications.

Available in Hexagonal Socket drive and 6-Lobe (Hexalobular) drive for higher reliability.

Additional Information:

• Item Code: B4A04

We are offering quality Socket Head CSK Screws. These screws are used extensively where a flush assembly is required. 
Specifications:

Metric series:

• Confirming to IS: 6761, DIN 7991, ISO 10642
• Threads :ISO metric coarse series 4g6g as per IS 4218, ISO 261, ISO 965. Standard thread lengths
• Materials: Alloy Steel (high tensile), mild steel and stainless steel (aisi 304 and 316)
• Mechanical: For alloy steel property class 12.9 and 10.9 as per IS 1367, ISO 898 part I
• Size Range : (M2),( M2.5), M3, M4, M5, M6, M8, M10, M12, (M14), M16, (M18),( M20), (M22), (M24). Lengths – from 5mm to 150 mm
• Sizes in brackets are non-preferred standards and availability is limited

Inch Series:

• Threads: BS whitworth, BS 84 and Unified Series.
• Materials: Alloy Steel (high tensile), mild steel and stainless steel aisi 304
• Mechanical: BS 2470 for alloy steel sockets.
• Size range: (1/8”), 3/16”, ¼”, 5/16”. 3/8”, (7/16”), ½”, 5/8”, 3/4”, (7/8”), (1”). Lengths 3/8” to 8”
• Also available in UNC threads 2-56, 4-40, 6-32, 8-32, 10-32
• Sizes in brackets are non-preferred standards and availability is limited

Additional Information:

• Item Code: B4A05

The hex socket screw drive has a hexagonal recess and may be driven by a hex wrench, also known as an Allen wrench, Allen key or hex key as well as by a hex screwdriver or bit.
DIN 7984 low head socket cap screws are commonly used in machine parts, die fixturing, and clamping.
The low socket head enables driving where there is not sufficient space for wrenches or sockets. 
Our range is in Stainless Steel AISI 304 and AISI 316[on request]

Additional Information:

• Item Code: B4A03

As per the variegated requirements of our clients, we are offering Socket Set Screws High Tensile Cup Point. Our given screw is manufactured from the superior quality material & leading techniques under the guidance of our professionals. Offered screw is acclaimed in various industrial applications due to its perfect finish. This screw is provided in numerous specifications as per the needs of customers.

Features:

• Fine polish
• Optimum quality
• Long lasting

Specifications:

Metric series:

• Socket Set Screws (Grub Screws) High Tensile DIN 916, ISO 4029
• Confirming to IS: 6094-4
• Threads: ISO metric coarse series 4g6g as per IS 4218, ISO 261, ISO 965. Standard thread lengths
• Materials: Alloy Steel (high tensile),
• Mechanical: For alloy steel property class 45H as per IS 1367, ISO 898 part V
• Size Range : (M2),( M2.5), M3, M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20,
• Lengths – from 2mm to 100 mm
• Sizes in brackets are non-preferred standards and availability is limited

Additional Information:

• Item Code: C9A07

The Socket Button Head Screw design is primarily used where a lower profile head is required and for aesthetical reasons.
These screws can take a lower tightening torque as compared to the DIN 912 screws.


Specifications:

• Threads: ISO metric coarse series 4g6g as per IS 4218, ISO 261, ISO 965. Standard thread lengths
• Materials: Alloy Steel (high tensile), mild steel and stainless steel (aisi 304 and 316)
• Mechanical: For alloy steel property class 10.9 as per IS 1367, ISO 898 part I
• Size Range: (M2),( M2.5), M3, M4, M5, M6, M8, M10, M12, (M14), (M16), (M18), (M20)
• Lengths – from 5mm to 100 mm
• Sizes in brackets are non-preferred standards and availability is limited

Additional Information:

• Item Code: C3A04

With the constant support of our experienced vendors, we are Socket Head Cap Screws. This head cap screw is accessible from us in numerous specifications to choose from. The given head cap screw is stringently tested on varied predefined parameters for dispatching a defect free range. Our given head cap screw is manufactured from excellent quality material & contemporary techniques at par with set norms.

Features:

• Easy installation
• Strong construction
• Aesthetic appeal

Specifications:

Metric series:

• Socket Head Cap Screws SHCS Allen Cap High Tensile And SS DIN 912 ISO 4762 In Bangalore
• Confirming to IS: 2269, DIN 912, ISO 4762
• Threads: ISO metric coarse series 4g6g as per IS 4218, ISO 261, ISO 965. Standard thread lengths
• Materials: Alloy Steel (high tensile), mild steel and stainless steel (aisi 304 and 316)
• Mechanical: For alloy steel property class 12.9 as per IS 1367, ISO 898 part I
• Size Range: (M2),( M2.5), M3, M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24. Lengths – from 5mm to 300 mm
• Sizes in brackets are non-preferred standards and availability is limited

Inch Series:

• BSW: BS : 2470
• Threads: BS whitworth, BS 84
• Materials: Alloy Steel (high tensile), mild steel and stainless steel aisi 304
• Mechanical: BS 2470 for alloy steel sockets
• Size range: (1/8”), 3/16”, ¼”, 5/16”. 3/8”, (7/16”), ½”, 5/8”, 3/4”, (7/8”), (1”). Lengths 3/8” to 8”
• Sizes in brackets are non-preferred standards and availability is limited

Additional Information:

• Item Code: A01