Call 08048603311 68% Response Rate

our range

RIVETS and Riveting Tools

A rivet is a permanent mechanical fastener widely used in industry. Used in many applications where light weight & high strength are critical, for example in an aircraft.

In addition, these are also useful for many sheet-metal alloys, which are preferably not welded, as deformation and modification of material can occur.

Types of Rivets

Solid Rivets:Round Head, Flat Head and CSK head
Break Stem Rivets or Pop Rivet:Dome head, CSK, Large Flange, Open type , Closed type etc.
Blind Rivet Nuts or Pop Nuts

Introducing the GOEBEL range of high quality Rivets.
Every batch is tested as per ISO 14589 for the following.
Rivet Shearing Test
Mandrel push out test
Mandrel retaining test
Mandrel breaking test
Rivet Tensile test


  • GO Blind Rivet Dome Head AL-ST
  • GO Blind Rivet Dome Head AL-ST
  • GO Blind Rivet Dome Head AL-ST
  • GO Blind Rivet Dome Head AL-ST
GO Blind Rivet Dome Head AL-ST

GO Blind Rivet Dome Head AL-ST

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
Item NoE1D31G
MaterialAluminium
FinishNatural
GradeAL.Mg2.5 Al.MG3.5
Packaging TypeBOX
CoatingNONE
CustomisationNot Customised
Product TypeBLIND RIVET
Usage/ApplicationJOINING
I Deal InNew Only
BrandGOEBEL
Standard blind rivets can be placed on components that are accessible on on one side  or on two sides.
Applications: containers/tanks, hollow body, tubes, profiles, air ducts and many others.

Characteristics • economical • versatile • strong • secure

High quality assurance as each batch is tested according to ISO 14589

The Dome Headed or sometimes called Round head blind rivet is the most versatile and commonly used type.

Size Range : 2.4mm to 6.4mm diameter. From 4mm to 60mm length.



Additional Information:

  • Item Code: E1D31G

View Complete details

get quote request a call back
  • Monel Blind Rivet
  • Monel Blind Rivet
  • Monel Blind Rivet
  • Monel Blind Rivet
Monel Blind Rivet

Monel Blind Rivet

Price on Request

Product Brochure

MaterialMONEL
FeaturesHigh Corrosion Resistance and Tensile Strength
Usage/ApplicationMarine and Aerospace
BrandGOEBEL
Corrosion ResistanceHIGH
Also known as Break-Stem or Pop Rivets. They are called “Blind” rivets because they can be installed from one side of the work. This allows product design to be simplified since only one side of the workpiece needs to be accessible.

Selection Guidelines.

1.  The shear and tensile strength of the rivet selected and the number of rivets used in the application should equal or exceed the joint strength requirements. Testing is recommended before final selection and use in product.

2. The rivet body material should be compatible with the materials to be joined to resist galvanic corrosion which may result in reduction of joint strength. If dissimilar materials are widely separated on the galvanic chart, it is advisable to separate them with a dielectric material such as paint or other coating.

3. After determination of strength required by diameter and alloy, the total thickness of materials to be joined must be considered. Select the Rivet grip range which included the total thickness of the material to be joined.

 4. Recommended hole sizes listed for each rivet diameter should be followed closely. An under-size hole will not allow insertion of the rivet body; an oversize hole will reduce shear and tensile strengths, and may cause improper rivet setting, all of which promote joint failure. 

“Monel” refers to a group of nickel alloys that provide enhanced capabilities to withstand conditions that other materials cannot. Monel rivets are commonly found in aerospace, marine, and oil and gas production/refinery applications, as well as in high end musical instruments, among other uses.

The material’s unique alloy composition gives solid Monel rivets a number of advantages, including:

 

  • High strength—Monel is stronger than pure nickel and many other pure metals
  • Excellent resistance to corrosion
  • Excellent resistance to seawater/marine conditions
  • High acid resistance
  • High melting point
  • Exceptional toughness
  • Maintains physical properties at extreme temperatures

View Complete details

get quote request a call back
  • Blind Pop Rivets CSK
  • Blind Pop Rivets CSK
  • Blind Pop Rivets CSK
  • Blind Pop Rivets CSK
Blind Pop Rivets CSK

Blind Pop Rivets CSK

Price on Request

Product Brochure

Minimum Order Quantity25 Piece
MaterialStainless Steel
FinishPASSIVATED
Quantity Per Pack100
GradeAISI 304
ColorSELF
CustomisationNot Customised
FeaturesCORROSION RESISTANT
Usage/ApplicationJOINING
Product TypeRivet
BrandGOEBEL
Stainless Steel Grade304 A2 and 316 A4
ConditionNew
I Deal InNew Only
Corrosion ResistanceGOOD
We deliver a high quality range of Blind Pop Rivets.

The break stem blind rivet fastener is a very versatile and cost effective riveting solution.

For a flush finish, us the Countersunk [CSK] head profile.

Available in Aluminium, Steel and Stainless Steel materials


Additional Information:

  • Item Code: D32
  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quote request a call back
  • GO-LOCK Structural Blind Rivet Steel
  • GO-LOCK Structural Blind Rivet Steel
  • GO-LOCK Structural Blind Rivet Steel
GO-LOCK Structural Blind Rivet Steel

GO-LOCK Structural Blind Rivet Steel

Price on Request

Product Brochure

Minimum Order Quantity25 Piece
Size4.8 and 6.4
MaterialAluminium
Item NoE6D39G
FinishNatural
Quantity Per Pack100
Colorself
FeaturesSTRUCTURAL RIVET
CodeE6D39
Usage/ApplicationRIVETING
Heat TreatmentNO
BrandGOEBEL
A Structural Blind Rivet also known as a monobolt is a Structural high strength fastener, designed to be used in single-sided structural applications with heavy loads.

It is designed to fix elements where a high resistance to both tensile and shear strengths are required. This fastener has been designed for heavy-duty fastening applications and ensures a quality fastening.

Due to its feature of adaptive expansion, the same size can be used for different thickness. This rivet guarantees a homogeneous riveting whatever the thickness, and ensures the locking of the mandrel inside the head, obtaining thus a great tightness.
Structural rivets work slightly different from the typical blind rivet. A structural blind rivet has a built-in (internal) locking mechanism that is designed to hold the mandrel inside of the rivet after the exposed portion snaps. This is commonly referred to as an interlock rivet.
Characteristics
• the mandrel head is held captive within rivet body (mechanical mandrel locking)
• watertight with suitable drill hole preparation
• high clamping capacity
• high shearing and tensile forces
• for high loads
• high resistance to vibrations.
 - Multi-grip range feature. Being a multigrip rivet, it offers the possibility to work in a big variety of grip ranges. Just two sizes of this rivet covers a grip range from 1 to 16 mm, reducing the number of rivets to be stored.

Applications - car manufacturing / trailer construction / constructional work / container construction / steel frame systems and many others



Additional Information:

  • Item Code: E6D39

View Complete details

get quote request a call back
  • Blind Pop Rivets RAL Coloured
  • Blind Pop Rivets RAL Coloured
Blind Pop Rivets RAL Coloured

Blind Pop Rivets RAL Coloured

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
TechniqueBLIND RIVET
MaterialAluminium
FinishEPOXY
Quantity Per Pack100
GradeAL.Mg2.5 Al.MG3.5
Packaging TypeBox
ColorBLACK
CustomisationNot Customised
CodeE1D31G-5
Product TypeRIVET
BrandGOEBEL
Blind rivets are installed in a tight hole that passes through the materials being riveted . A riveter is used to pull the mandrel back while holding the rivet in place . As the mandrel is pulled back it deforms the rivet pushing the sides outward until the mandrel snaps. This expanded size forms the back side of the rivet holding the materials together.
For Architeral purpose, Large Flange Blind Rivets are available in a variety of colours as per the RAL chart.


Additional Information:

  • Item Code: E1D31-5
  • Pay Mode Terms: T/T (Bank Transfer)

View Complete details

get quote request a call back
GO Peel Blind Rivets

GO Peel Blind Rivets

Price on Request

Product Brochure

Size3.2 - 4.8, Length upto 50mm
MaterialAluminium
Head TypeDOME
Quantity Per Pack500
FeaturesPeel Rivet
Usage/ApplicationRiveting Soft Materials
Corrosion ResistanceYES
GradeAl-Mg 5
Head Diameter3.2 - 4.8
BrandGOEBEL
Riveting Soft Materials

As products are increasingly utilising multi material assemblies, it has become important to understand the various options and processes available for joining the same. A common and useful method is using blind rivets which allow fast and convenient assembly. However, when joining soft or low density materials like plastics, wood, fabric etc., the rivet head can pull through during fastening or application of load. Therefore it is important to select the correct type of rivet and process.

A rivet with a large Flange head is a good option in many cases where a soft part is to be fastened to a hard part with the large flange abutting the soft side. There are also new designs available which are better suited for such applications.

The PEEL blind rivet is one such type of blind rivet. On setting the body splits into several parts, assuring a good fastening on soft or irregular surfaces.

GO PEEL Blind Rivets 
Peeled rivets are extremely versatile and necessary for joining softer materials without fracturing or distortions. These are particularly suitable for uneven surfaces or where oversized holes remain after repairs.

Characteristics

  • Fixing the rivet creates a closing head with a large diameter
  • After setting the mandrel head might remain within the rivet body or might drop out
  • Especially suitable for connections with wood, hardboard, fibre-glass, plasterboard or similar
  • Relatively soft or porous materials can be joined together with high tensile forces

Applications

  • Mounting of plastic, rubber, cardboard and felt elements etc.
  • Mounting of wooden elements
  • Construction of mobile homes
  • Fixing of panelling and many others


Additional Information:

  • Item Code: E1D59G

View Complete details

get quote request a call back
Blind Rivets Dome Head SS

Blind Rivets Dome Head SS

Price on Request

Product Brochure

Minimum Order Quantity25 Piece
MaterialStainless Steel
FinishNatural
GradeAISI 304
As a remarkable name in the industry, we are delivering a distinguished collection of Blind Rivets. This blind rivet is accessible from us in numerous specifications to choose from. The given blind rivet is stringently tested on varied predefined parameters for dispatching a defect free range. Our given blind rivet is manufactured from excellent quality material & contemporary techniques at par with set norms.

Features:

  • Highly durable
  • Rust free
  • Fine finish


Additional Information:

  • Item Code: D31

View Complete details

get quote request a call back
GO Blind Rivet CSK AL-ST

GO Blind Rivet CSK AL-ST

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
MaterialAluminium
GradeAL.Mg2.5 Al.MG3.5
Standard blind rivets can be placed on components that are accessible on on one side  or on two sides.
Applications: containers/tanks, hollow body, tubes, profiles, air ducts and many others.

Characteristics • economical • versatile • strong • secure

High quality assurance as each batch is tested according to ISO 14589

The Countersunk or CSK head profile provides a neat and flush finish to the joint. This enables multiple layered assembly and also a safe surface without any projection.

Size Range : 2.4mm to 6.4mm diameter. From 4mm to 60mm length.

Rivet Material :  Aluminium AL.MG2.5 and AL.MG3.5
Mandrel: Steel Zinc plated



Additional Information:

  • Item Code: E1D32G

View Complete details

get quote request a call back
Monobolt Structural Blind Rivets

Monobolt Structural Blind Rivets

Price on Request
Size4.8 - 6.4
MaterialSteel
Being the most reputed organization supervised by our workforce, we provide high quality range of Monobolt Structural Blind Rivet. Our given blind is manufactured from the superior quality material & leading techniques under the guidance of our professionals. Offered blind is acclaimed in various industrial applications due to its perfect finish. This blind is provided in numerous specifications as per the needs of customers.

Features:

  • Highly durable
  • Reliable
  • High strength


Additional Information:

  • Item Code: D39

View Complete details

get quote request a call back
  • Closed End Sealed Blind Rivets Go
  • Closed End Sealed Blind Rivets Go
  • Closed End Sealed Blind Rivets Go
  • Closed End Sealed Blind Rivets Go
Closed End Sealed Blind Rivets Go

Closed End Sealed Blind Rivets Go

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
TechniqueBLIND RIVET
MaterialALUMINIUM
Size2.4 TO 6.4
Quantity Per Pack1000
FeaturesSEALED CUP TYPE RIVET
Usage/ApplicationRIVETING
CoatingNONE
ShapeDOME HEAD
ColorSELF
Product TypeBLIND RIVET
Is It CustomizedNon Customized
I Deal InNew Only
Closed end blind rivets are a type of tubular rivet with a mandrel through the center. To install a closed end rivet, the entire fastener is inserted through drilled holes in the parts being joined, and a special tool is used to draw the mandrel into the rivet. The blind end of the rivet expands to secure the workpieces, and the mandrel snaps off. Unlike open end blind rivets, closed end blind rivets provide 100% mandrel retention. The head of the mandrel stays inside the set rivet, and won’t find its way into your assembly where it could cause electrical shorts or other problems. Closed end rivets block the passage of fluids and gases to create a tight, secure seal.

Characteristics
• airtight, dust and waterproof (with a fitting drill hole)
• captive mandrel head
• very suitable for automatic production
• high pressure on the join end
• good pressure on the face of the hole

Applications
• car body production
• construction industry
• tank construction and apparatus engineering
• container construction
• air-conditioning
• shipbuilding and many others

Additional Information:

  • Item Code: E6D35G

View Complete details

get quote request a call back
  • Cordless Blind Rivet Tool - AKKU GO-BR1
  • Cordless Blind Rivet Tool - AKKU GO-BR1
  • Cordless Blind Rivet Tool - AKKU GO-BR1
  • Cordless Blind Rivet Tool - AKKU GO-BR1
Cordless Blind Rivet Tool - AKKU GO-BR1

Cordless Blind Rivet Tool - AKKU GO-BR1

Price on Request

Product Brochure

Size247 x 55 x 250 mm
Model Name/NumberGO-BR1
BrandGoebel
Rivet Dia3.2 - 5.0 mm
Traction Power12,000 N
Stroke (B/S)B = 21 mm / S = 15 mm
AKKU GO-BR1 – The ultimate portable tool with extreme reliability and performance.

Key Features

  • Brushless motor with high durability.
  • Slide-in battery (18V Li-ION 2,0 Ah / 36 Wh) with capacity indicator.
  • LED Light for better visibility of work area.
  • Robust housing in ergonomic design with soft grip.
  • Transparent, empty-able mandrel collector


Additional Information:

  • Item Code: Q4F4003005G

View Complete details

get quote request a call back
  • Cordless Nut Riveting Tool - AKKU GO-RN1
  • Cordless Nut Riveting Tool - AKKU GO-RN1
  • Cordless Nut Riveting Tool - AKKU GO-RN1
  • Cordless Nut Riveting Tool - AKKU GO-RN1
Cordless Nut Riveting Tool - AKKU GO-RN1

Cordless Nut Riveting Tool - AKKU GO-RN1

Price on Request

Product Brochure

Model Name/NumberGO-RN1
BrandGoebel
Rivet DiameterM3 to M8
Part NumberQ4F4303008G
Length270 x 55 x 260 mm
Weight0.6 kg

Key Features

  • Brushless motor with high durability.
  • Slide-in battery (18V Li-ION 2,0 Ah / 36 Wh) with capacity indicator.
  • LED Light for better visibility of work area.
  • Robust housing in ergonomic design with soft grip.


Additional Information:

  • Item Code: Q4F4303008G

View Complete details

get quote request a call back
  • Blind Pop Rivet - Multi Grip
  • Blind Pop Rivet - Multi Grip
Blind Pop Rivet - Multi Grip

Blind Pop Rivet - Multi Grip

Price on Request

Product Brochure

Minimum Order Quantity50 Piece
Size3.2 TO 6.4
MaterialALUMINIUM
Quantity Per Pack500
FeaturesMULTIGRIP BLIND RIVET
Usage/ApplicationRIVETING
ColorSELF
CoatingNONE
GradeAL-MG2.5/AL-MG3.5
CustomisationNot Customised
Heat TreatmentNO
Product TypeHIGH QUALITY
Packaging TypeBOX
I Deal InNew Only

Multi-Grip Blind Rivets are a good solution to remove the variability from hole preparation. At times, drilled holes may have a slightly larger diameter, in which case Multi-Grips would perform more reliably. Similarly, the lamination of sheet metals may require many different rivet lengths. Multi-Grip Rivets work across an extensive grip range, reducing inventory SKU's and eliminating stock outs. Multigrips have an increased take up strength and provide a more secure mandrel ball to reduce escapement. There are three different styles of Multi-Grips each with their own unique advantages. They are available in a variety of materials which provide specific benefits such as joint strength, material compatibility, corrosion resistance and cost. Multigrip rivets are a good solution when traditional rivets don't work as desired.

Multigrip blind rivets are useful for joining materials or components with pre-drilled holes, or where the surfaces to be joined are curved or folded, which can make it difficult to align two holes of matching size.

Features & Benefits of Multi-Grip Rivets

 

  • Extensive grip range reduces inventory requirements
  • Use as a standard open-end rivet
  • No special tools required—installs with a standard blind rivet setter
  • Accommodate oversize holes
  • Vibration resistant
  • Dome head, countersunk head, and large flange head styles available

 

 

 

 



Additional Information:

  • Item Code: D34

View Complete details

get quote request a call back
  • Blind Rivet Copper
  • Blind Rivet Copper
  • Blind Rivet Copper
Blind Rivet Copper

Blind Rivet Copper

Price on Request

Product Brochure

Minimum Order Quantity50 Piece
Head TypeRound
MaterialCOPPER-STEEL
I Deal InNew Only
BrandGOEBEL

Also known as Break-Stem or Pop Rivets. They are called “Blind” rivets because they can be installed from one side of the work. This allows product design to be simplified since only one side of the workpiece needs to be accessible.

 Blind rivets offer a number of advantages over threaded bolts. They won’t loosen when subjected to vibration and can secure joints with short clamp length. They are the fastest way to join materials. They can be set at 150pcs to 500pcs per hour, and each setting is identical; this cuts assembly time and costs. Unlike threaded fasteners, there are no concerns over tool clearance, rotation failures, and secondary parts such as bolts and tapping plates, all of which add assembly time, weight, and cost.

Copper Blind Rivets are extremely suitable for applications requiring electrical conductivity, strength and corrosion resistance. They are also useful for architechtural purposes and antique finishes.



Additional Information:

  • Item Code: F3D31

View Complete details

get quote request a call back
  • GO-3 Blind Riveting Hand Tool Heavy Duty
  • GO-3 Blind Riveting Hand Tool Heavy Duty
GO-3 Blind Riveting Hand Tool Heavy Duty

GO-3 Blind Riveting Hand Tool Heavy Duty

Price on Request
Minimum Order Quantity1 Piece
Model Name/NumberGO-3
BrandGoebel
MaterialSteel
Warranty3 Months
Rivet Dia3.2 TO 4.8
A high quality one hand operating tool.
Heavy Duty Model for all materials.

Additional Information:

  • Item Code: Q1F3803000G
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
  • GO-360 Hand Riveter Swivel
  • GO-360 Hand Riveter Swivel
GO-360 Hand Riveter Swivel

GO-360 Hand Riveter Swivel

Price on Request
Minimum Order Quantity1 Piece
Model Name/NumberGO-360
Size3.2 TO 4.8
MaterialSteel
Rivet Dia3.2 TO 4.8
BrandGOEBEL
Warranty6 Months
Master Pack Qty20
A high quality Hand Riveter with unique 360 degree swivel action.


Additional Information:

  • Item Code: Q1F3836000G
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
Blind Pop Rivets Large Flange

Blind Pop Rivets Large Flange

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
MaterialAluminium
FinishNatural
GradeAL.Mg2.5 Al.MG3.5
CustomisationNot Customised
Usage/ApplicationJOINING
Our large flange pop rivets are available in 14mm and 16m flange diameters.

The large flange provides a large bearing surface area and is suitable for riveting materials with lower strength like plastics.

Also available in Epoxy colour coated finish for exterior panels.

Additional Information:

  • Item Code: D33

View Complete details

get quote request a call back
  • Go Blind Rivet Large Flange AL-ST
  • Go Blind Rivet Large Flange AL-ST
  • Go Blind Rivet Large Flange AL-ST
  • Go Blind Rivet Large Flange AL-ST
  • Go Blind Rivet Large Flange AL-ST
Go Blind Rivet Large Flange AL-ST

Go Blind Rivet Large Flange AL-ST

Price on Request

Product Brochure

MaterialAluminium
Standard blind rivets can be placed on components that are accessible on on one side  or on two sides.
Applications: containers/tanks, hollow body, tubes, profiles, air ducts and many others.

Characteristics • economical • versatile • strong • secure

High quality assurance as each batch is tested according to ISO 14589

The Dome Headed or sometimes called Round head blind rivet is the most versatile and commonly used type.

Large flange blind rivets feature wider flanges to provide extra fastening power in applications involving sheet metal or other large materials. These rivets feature a larger flange diameter to provide adequate coverage for oversized or irregularly shaped holes, and to provide a more secure hold for applications involving soft materials.  


Size Range : 3.2mm to 6.4mm diameter. From 6mm to 40mm length.

Rivet Material :  Aluminium AL.MG2.5 and AL.MG3.5
Mandrel: Steel Zinc plated

  

 

  



Additional Information:

  • Item Code: E1D33G

View Complete details

get quote request a call back
  • Mechanical Riveting Tools
  • Mechanical Riveting Tools
  • Mechanical Riveting Tools
Mechanical Riveting Tools

Mechanical Riveting Tools

Price on Request

Product Brochure

Minimum Order Quantity1 Piece
BrandSEW
MaterialSteel
Warranty3 Months
Rivet Dia2.4 TO 6.4
For installing blind break-stem rivets, hand held tools are available in many types.
The major types being Mechanical, Pnuematic, Hydro-Pnuematic, Electrical and Cordless.
Mechanical hand held riveters are the most common and versatile to use. A number of models are available which suit every application and situation.
From the plier type, lazy tongs type and lever type, there is a model to suit.

Additional Information:

  • Item Code: F38
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
  • Hammer Drive Rivets Type U SS
  • Hammer Drive Rivets Type U SS
Hammer Drive Rivets Type U SS

Hammer Drive Rivets Type U SS

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
Quantity Per Pack100
MaterialSTAINLESS STEEL
Hammer Drive Rivets type U are also known as hammer drive screws or U rivets.
These are used for a strong permanent fastening and are driven with a hammer.
Applications: For name plate fastening, holding light parts to castings, plastics, steel, brass, aluminium, bakelite etc. 
Hammer drive rivets may be used only in material that is thick enough to permit a sufficient engagement of the threas for satisfactory fastening.


Additional Information:

  • Item Code: D27
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
Solid Rivet Round Head SS

Solid Rivet Round Head SS

Price on Request

Product Brochure

MaterialStainless Steel
Head TypeRound
Head ShapeDome
Size1.6 - 8
ColorNatural
FinishNatural

Solid rivets are very important components in any industrial application, which we manufacture and trade. These rivets are capable of providing high strength in various critical applications. They are very handy in order to avoid any kind of deformation or change in size of the material like the sheet-metal alloys, which again cannot be welded.

A solid rivet has a manufactured head on one end and a solid shank on the other. Solid fasteners offer cheap but efficient alternative in various assembly operations.

Their USP lies in their low cost and lightweight feature for industrial operations involving welding and movable joints. Being lightweight, large quantities can be transported over large distance without adding to the overhead production costs.



Additional Information:

  • Item Code: B4D36

View Complete details

get quote request a call back
GO-55 Blind Riveting Hand Tool

GO-55 Blind Riveting Hand Tool

Price on Request

Product Brochure

Minimum Order Quantity1 Piece
Model Name/NumberGO-55
A high quality one hand operating tool.

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES