J. C. Gupta & Sons

Long Nuts are made as per DIN 6334 and are very useful as connectors and where a longer thread engagement is required.
They are also utilised as threaded spacers.
Available in Stainless Steel AISI 304 Grade and in AISI 316 upon specific orders.

Additional Information:

• Item Code: B4C37
• Delivery Time: EX STOCK

We maintain ready stocks of D-Nuts suitable for various fixings in Wood.

Range : M3 to M10 and 3/16" to 3/8"

Additional Information:

• Item Code: A2C06

Useful for fixing components on thin sheets by providing a strong thread.
These are manufactured from Stainless Steel AISI-303 grade.
Available in sizes from M2.5 to M8.

Additional Information:

• Item Code: B3C38

Left hand nuts look like regular nuts but are threaded opposite of "standard" (right-hand) nuts. Consequently, turn them counter-clockwise to install and tighten. Often abbreviated "LH" for left-hand, use left hand nuts with left hand threaded bolts, screws, studs and threaded rod. They are also known as: 

reverse threaded nuts.

 There are two types of left hand nuts commonly available: hex and heavy hex. They cannot be used with right-hand threaded fasteners.

Left-handed thread applications include:

Where the rotation of a shaft would cause a conventional right-handed nut to loosen rather than to tighten due to applied torque or to fretting induced precession. Examples include:

o   The left hand pedal on a bicycle.

o   The left-hand grinding wheel on a bench grinder.

o   The axle nuts, or less commonly, lug nuts on the left side of some automobiles.

o   The securing nut on some circular saw blades – the large torque at startup should tend to tighten the nut.

Our range is available in Stainless Steel and include fine pitch sizes also.

Additional Information:

• Item Code: B4C31q

Being the most reputed organization supervised by our workforce, Blind Rivet Pop Nuts. These rivet pop nuts are expertly manufactured keeping in mind with quality norms using top grade material, under the keen observation of experienced professionals. The given rivet pop nuts is accessible in different specifications as per the variegated needs of customers. Our esteemed clients can avail these rivet pop nuts from us at reasonable rates.

Features:

• Corrosion resistance
• Highly durable
• Reliable

Specifications:

• Types: Hex, Tubular, Semi Hex, Large Flange, Reduced Flange.
• Materials: Mild steel and stainless steel
• Size Range : MS--> m3, m4, m5, m6, M8 and m10
• SS--> m3, m4, m5, M6, M8 and M10
• We also have Manual and Pneumatic Tools for fixing these nuts.
• Typical Uses : Providing a nut for sheet metal

Additional Information:

• Item Code: C42

A clinch nut is a threaded fasteners secured by a press fit into one of the pieces to joined. It is frequently used in sheet metal desihhs when a material is too thin to tap threads. incorporates a knurled platform and a groove. This knurled platform, when embedded in the sheet, causes the displaced material to flow evenly into the groove of the fastener to give a positive retention.

Benefits:

1. Its small & neat, making it ideal for all precision or electronic equipment.
2. Has as easy assembly with any sqeeze action poress.
3. Has high torque resistance
4. Retains the reverse side of the sheet totally flush.

Available in MS, SS and hardened SS.
Size Range : Metric M2 to M10 UNIFIED Threads also available.

Additional Information:

• Item Code: C39

For Clamping the T-Slot nuts are an indispensible part of a machine shop.

Material : High grade Alloy Steel Hardened and Tempered.

Standard - DIN 508 IS-2015

Additional Information:

• Item Code: C1C60

We are offering hex nuts in a large range.
Specifications:

Metric Series: IS 1364, ISO 4032,

Materials: Alloy Steel (high tensile), mild steel, Brass and stainless steel (aisi 304 310 and 316), Titanium

Mechanical : For alloy steel property class 8 as per IS 1367, ISO 898 part II.

For mild steel 4 class.

Size Range : M1.2, M1.4, M1.6, (M2), (M2.5), M3, M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), (M30), (M33), (M36),( M39), (M42).

Standard Coarse pitch and some FINE-Pitch sizes available.

A limited range of LH nuts available.

Sizes in brackets are non-preferred standards and availability is limited.

Additional Information:

• Item Code: B4C31
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: EX STOCK

A nyloc nut, also referred to as a nylon-insert lock nut, polymer-insert lock nut, or elastic stop nut, is a kind of locknut with a nylon collar insert that resists turning.

The plastic insert is placed at the end of the nut, with an inner diameter (ID) slightly smaller than the major diameter of the screw. The insert deforms elastically over the threads of the screw, without having threads in turn cut into it. The nylon insert locks the nut by friction against the screw under the applied radial compressive force. Nyloc nuts retain their locking ability up to 250 °F (121 °C)

The Flanged Nylock Nuts as per DIN 6926 have the additional advantage of distributing the load over a larger area.
Available in Stainless Steel.

Additional Information:

• Item Code: B4C40

 

A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together.

The most common shape today is hexagonal, for similar reasons as the bolt head: six sides give a good granularity of angles for a tool to approach from (good in tight spots), but more (and smaller) corners would be vulnerable to being rounded off. It takes only one sixth of a rotation to obtain the next side of the hexagon and grip is optimal.

We are offering hex nuts in a large range.
Specifications:

Metric Series: IS 1364, ISO 4032,

Materials: Alloy Steel (high tensile), mild steel, Brass and stainless steel (aisi 304 310 and 316), Titanium

Mechanical : For alloy steel property class 8 as per IS 1367, ISO 898 part II. For mild steel class 4.

Size Range : M1.2, M1.4, M1.6, M2, M2.5, M3, (M3.5) M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, (M22), M24, (M27), (M30), (M33), (M36),( M39), (M42).

Standard Coarse pitch and some FINE-Pitch sizes available.

A limited range of LH nuts available.

Sizes in brackets are non-preferred standards and availability is limited.

Additional Information:

• Item Code: B4C32
• Delivery Time: EX STOCK

Supported by the rich industry experience, we are delivering superior Nylock Nuts. This nylock nut is accessible from us in numerous specifications to choose from. The given nylock nut is stringently tested on varied predefined parameters for dispatching a defect free range. Our given nylock nut is manufactured from excellent quality material & contemporary techniques at par with set norms.

Features:

• Longer service life
• Low maintenance
• Robust construction

Specifications:

• Metric Series: DIN 985 DIN 982
• Materials: Available in mild steeel, grade 8 and stainless steel grades AISI-304 and AISI-316
• Size Range: Sizes m2.5 to m24

Additional Information:

• Item Code: B4C33
• Delivery Time: Ex. Stock. Elso 30 days

An acorn nut, also referred to as crown hex nut, blind nut, domed cap nut, or dome nut is a nut that has a domed end on one side. When used together with a threaded fastener with an external male thread, the domed end encloses the external thread of the threaded fastener, either to protect the thread itself or to protect nearby objects from contact with the thread. In addition, the dome gives a more finished appearance
Dome nuts have a huge variety of uses. From being used for it's aesthetics as a cover for threaded rods and as caps for machine screws in architectural metalwork. To being used in the car modification business as an alternative to manufacturer supplied nuts and fixings
DOME Nuts are available in Mild Steel and Stainless Steel.

DIN 1587

Additional Information:

• Item Code: C36
• Delivery Time: Ex Stock

The square nuts are used in machine building, instrument engineering and construction for reliable connection of fasteners, subjected to dynamic impact and strong vibrations, protection against self unscrewing. This nut is mounted in pre-prepared grooves for a more concealed attachment and eliminates the need to grip the nut during installation.
Manufactured according to DIN 562, our range is available in Stainless Steel.

Additional Information:

• Item Code: B4C56

Jump to search

A DIN 929 style weld nut. An example of a three projection weld nut.

A weld nut is a special type of nut specifically designed to be welded to another object. There are various types for different applications.
Weld nuts are made with a greater amount of material than other nuts so that the nuts form is maintained after being welded to another object.

    Available in Stainless Steel grades A2 and A4 and Carbon Steel.

Metric Series: Square Weld Nut-JIS B 1196 .DIN928

 

 

Specifications:

Metric Series: Square Weld Nut – JIS B 1196 .DIN 928

Additional Information:

• Item Code: C28

We maintain ready stocks of T-Nuts suitable for various fixings in Wood.

Range : M3 to M10 and 3/16" to 3/8"

Additional Information:

• Item Code: A2C54

The Hex Cap nuts made as per DIN 917 are ideal to close a threaded portion jutting out from a fixture.
We stock Cap Nuts of Stainless Steel AISI-304 Grade.
Range available 
M3 to M12

Additional Information:

• Item Code: B4C29

Cage Nuts offered by us are a square spring supported steel cage with a nut to hold on that. Mainly used for holding a square-holed equipment with racks of different types. Offered in varied size and dimensions, these products are commonly used now days in many industries. Manufactured using finest quality raw materials like steel, aluminum and other products these are available at industry leading prices.

 

Additional Information:

• Item Code: A2C51

A weld nut is a special type of nut specifically designed to be welded to another object. There are various types for different applications.
These nuts are very similar to standard hex nuts, but have a locating boss and welding projections. The bosses also keep weld spatter out of the threads.
Hex weld nuts are a six-sided, internally threaded fastener with three triangular weldable projections on the top surface of every other corner of the fastener. The threaded hoe runs through the center and has a pilot for the entire circumference of the opening which extends above the top surface of the nut and the above projections. The remainder of the top surface of the nut is flat.
We have a ready range of Hex Weld Nuts.

Size Range
M4 to M12

Materials
Carbon Steel
Stainless Steel AISI-304
Stainless Steel AISI-316

Standard - DIN 929

Additional Information:

• Item Code: B4C27

To retain our goodwill in clients'' consideration, we are delivering Flange Nuts. Our provided flange nut is well known in the industry for its optimum quality. The provided flange nut is well checked on numerous parameters before supplying in the market. This flange nut is manufactured as per the set industry norms using best in class material & modern techniques following the set norms of industry.

Features:

• Precise design
• Durable construction
• Longer service ability

Specifications:

• Metric Series: JIS B 1190 DIN 6923
• Size Range: m2.5 to m24
• Materials - Alloy Steel and Stainless Steel - Grades AISI-304 and AISI-316

Additional Information:

• Item Code: B4C48

The Lock Nuts,DIN 439 ISO 4035 also called Half Nuts are made to highly precision specifications. The materials we use are mild steel and SS AISI 304 grade. The size ranges  in MS from M5 to M24 and in SS 304 from M4 to M24. The sizes in brackets are non-preferred standards and availability is limited. Under typical conditions they are used in union with a standard nut to make a locking assembly.

 

Specifications:

Materials: Mild Steel & SS AISI 304 grade.

Size Range : MS from M5 to M24 and in SS from M4 to M24.
(M14, M18, M22)

Sizes in brackets are non-preferred standards and availability is limited.

Typical Uses : Used in conjunction with a standard nut to provide a locking arrangement.

 

Additional Information:

• Item Code: B4C35

As a remarkable name in the industry, we are delivering distinguished Wing Nuts. The offered wing nut is manufactured in sync with industrial norms using quality approved material & latest technology. This wing nut is inspected on several parameters in order to supply a faultless range. Offered wing nut can be availed in bulk quantity by our valuable customers at market leading price.

Features:

• High strength
• Long functional life
• Rugged design

Additional Information:

• Item Code: B4C47