Call 08048603311 68% Response Rate

our range

Industrial Washers

A plain washer is a thin plate, which is most commonly has a disk-shape with a hole in middle. It is widely used to distribute the load of a threaded fastener.

In addition, Washers are also used for locking a device and reducing the vibration. These locking washers are available in various types such as spring washers, star washers, multi-tooth washers, disc spring washers, wave washers, taper washers, safety washers etc.

 

These are available in Mild Steel, Spring Steel and Stainless Steel.

  • Stainless Steel Small OD Washers DIN 433
  • Stainless Steel Small OD Washers DIN 433
  • Stainless Steel Small OD Washers DIN 433
Stainless Steel Small OD Washers DIN 433

Stainless Steel Small OD Washers DIN 433

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
MaterialStainless Steel
SizeM1.6[A1.7] to M20[A21]
Surface FinishPASSIVATED
ShapeROUND
FeaturesROHS COMPLIANT
Usage/ApplicationAutomobile Industry
Inner Diameter1.7 to 21 mm
Material GradeAISI 304
Outer Diameter3.5 to 34 mm
I Deal InNew Only
StandardDIN 433
ConditionNew
Product CustomizationNo
Rust ResistantYes
Thickness in mm0.3 to 3

A plain washer is a thin plate, which is most commonly has a disk-shape with a hole in middle. It is widely used to distribute the load of a threaded fastener.

In addition, Washers are also used for locking a device and reducing the vibration. These locking washers are available in various types such as spring washers, star washers, multi-tooth washers, disc spring washers, wave washers, taper washers, safety washers etc.

 

These are available in Mild Steel, Spring Steel and Stainless Steel.

For use under Machine Screws, smaller OD washers are preferred. These are made as per DIN 433.
Available in SS-304 and SS-316

Additional Information:

  • Item Code: B4D10
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
  • Plain Washers NYLON DIN 125
  • Plain Washers NYLON DIN 125
  • Plain Washers NYLON DIN 125
Plain Washers NYLON DIN 125

Plain Washers NYLON DIN 125

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
ShapeRound
MaterialNYLON
Surface FinishNONE
Usage/ApplicationIndustrial
Shape TypeROUND
StandardDIN 125
Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

There is a large range available to suit every application. The normal series is available as per the following standards
DIN 125
ISO 7089
IS 2016

We ensure that every batch confirms correctly to the relevant standard and material grade.

They are available in the following materials.
Mild Steel - Natural Finish, Zinc Plated and Nickel Plated
Stainless Steel - AISI 304 and AISI 316
Titanium
NYLON

Additional Information:

  • Item Code: K3D02
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
  • Conical Spring Washer DIN 6796 SS 304
  • Conical Spring Washer DIN 6796 SS 304
  • Conical Spring Washer DIN 6796 SS 304
Conical Spring Washer DIN 6796 SS 304

Conical Spring Washer DIN 6796 SS 304

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
Material GradeAISI-304
ShapeRound
MaterialStainless Steel
Grade300 Series
Surface FinishPassivated
BrandJC
ColorNatural
Model Name/NumberB4D20
A Conical spring washer designed to help prevent loosening of bolted joints under vibration. This type, manufactured to DIN 6796 has an inherent conical shape. It is also known as a Belleville washer, disc spring, coned-disc spring and cupped disc washer.

Additional Information:

  • Item Code: B4D20

View Complete details

get quote request a call back
Plain Washer DIN 125 AISI 316

Plain Washer DIN 125 AISI 316

Price on Request

Product Brochure

Minimum Order Quantity50 Piece
Material GradeAISI 316
MaterialStainless Steel
Surface FinishPASSIVATED
Usage/ApplicationIndustrial
Shape TypeROUND
StandardDIN 125
SS GradeMARINE GRADE
ShapeRound
Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

There is a large range available to suit every application. The normal series is available as per the following standards
DIN 125
ISO 7089
IS 2016

We ensure that every batch confirms correctly to the relevant standard and material grade.

They are available in the following materials.
Mild Steel - Natural Finish, Zinc Plated and Nickel Plated
Stainless Steel - AISI 304 and AISI 316
Titanium
AISI 316 which is also known as Marine grade is readily available and recommended for long life.

Additional Information:

  • Item Code: B6D02
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
  • Large Washers DIN 9021 SS-304
  • Large Washers DIN 9021 SS-304
Large Washers DIN 9021 SS-304

Large Washers DIN 9021 SS-304

Price on Request

Product Brochure

Minimum Order Quantity50 Piece
Material GradeAISI 304
Surface FinishPassivated
MaterialStainless Steel
Usage/ApplicationIndustrial
Shape TypeROUND
StandardDIN 9021
SS GradeAISI 304
ShapeRound
Inner Diameter2.7 to 39 mm
Outer Diameter8.0 to 110.00
Thickness in mm0.80 to 8
Bolt size in mmM2.5 to M36
Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

There is a large range available to suit every application. The large washer series is available as per the following standards
DIN 9021
ISO 7093

Large OD washers are normally used when mating with soft material surfaces such as plastics, composites, fiber etc.
The large surface area helps spread the load and prevent base material failure.

We ensure that every batch confirms correctly to the relevant standard and material grade.

They are available in the following materials.
Mild Steel - Natural Finish, Zinc Plated and Nickel Plated
Stainless Steel - AISI 304 and AISI 316
Titanium - Will be available shortly.

Additional Information:

  • Item Code: B4D03
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
  • Plain Washers DIN 125 SS-304
  • Plain Washers DIN 125 SS-304
Plain Washers DIN 125 SS-304

Plain Washers DIN 125 SS-304

Price on Request

Product Brochure

Minimum Order Quantity50 Piece
Material GradeAISI 304
MaterialStainless Steel
Surface FinishSS passivated
Usage/ApplicationIndustrial
Shape TypeROUND
StandardDIN 125
SS GradeAISI 304
ShapeRound
Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

There is a large range available to suit every application. The normal series is available as per the following standards
DIN 125
ISO 7089
IS 2016

We ensure that every batch confirms correctly to the relevant standard and material grade.

They are available in the following materials.
Mild Steel - Natural Finish, Zinc Plated and Nickel Plated
Stainless Steel - AISI 304 and AISI 316
Titanium - Will be available shortly.

Additional Information:

  • Item Code: B4D02
  • Pay Mode Terms: T/T (Bank Transfer)
  • Port of Dispatch: Bengaluru
  • Delivery Time: Ex Stock

View Complete details

get quote request a call back
Large Washer DIN 9021 AISI 316

Large Washer DIN 9021 AISI 316

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
MaterialStainless Steel
Surface FinishPASSIVATED
Material GradeAISI 316
Shape TypeROUND
ShapeRound
SS GradeMARINE GRADE
FeaturesROHS COMPLIANT
Usage/ApplicationINDUSTRY
StandardDIN 9021
I Deal InNew Only
Product CustomizationYes
Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

There is a large range available to suit every application. The large washer series is available as per the following standards
DIN 9021
ISO 7093

Large OD washers are normally used when mating with soft material surfaces such as plastics, composites, fiber etc.
The large surface area helps spread the load and prevent base material failure.

We ensure that every batch confirms correctly to the relevant standard and material grade.

They are available in the following materials.
Mild Steel - Natural Finish, Zinc Plated and Nickel Plated
Stainless Steel - AISI 304 and AISI 316
Titanium - Will be available shortly.

Additional Information:

  • Item Code: B6D03
  • Delivery Time: EX STOCK

View Complete details

get quote request a call back
Plain Washer Titanium DIN 125

Plain Washer Titanium DIN 125

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
BrandJC
TypeCommercially Pure
MaterialTitanium
Surface FinishNatural Finish
Usage/ApplicationAerospace and Marine
Shape TypeRound
StandardDIN 125
SS GradeTi Grade 2

A plain washer is a thin plate, which is most commonly has a disk-shape with a hole in middle. It is widely used to distribute the load of a threaded fastener. Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

The main role of flat washers is to increase the size of a screw’s bearing surface area, and reduce the surface pressure applied on the fastened object.

Looseness can result when the bearing surface sinks under the surface pressure, so using a flat washer to reduce the surface pressure is very effective.

This is especially crucial if the contact area between a screw’s bearing surface and the object being fastened is small when fastening to a slot, for instance, or if the object being fastened is made of soft material such as aluminum or resin.
Titanium Washers offer many advantages.
– Lightweight; Weighs half of stainless steel.
– Non Magnetic; Extremely low magnetism
– Non Toxic: Safe for the human body
– Superior corrosion resistance; Excellent resistance to acid-base.
Titanium Grade 2 Washers available as per DIN-125



Additional Information:

  • Item Code: R1D02-tITANIUM

View Complete details

get quote request a call back
  • E Type Circlips - Spring Steel DIN 6799
  • E Type Circlips - Spring Steel DIN 6799
E Type Circlips - Spring Steel DIN 6799

E Type Circlips - Spring Steel DIN 6799

Price on Request

Product Brochure

MaterialSpring Steel
Size0.8 - 24
Usage/ApplicationRetaining Rings
GradeSpring Steel

We offer a comprehensive range of E type circlips.

The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter. This range can be supplied stacked on rods for use with applicators and dispensers for rapid installation, thus resulting in sharply reduced assembly costs.

Only the groove size is critical with this type of circlip, the shaft diameter can be varied widely.



Additional Information:

  • Item Code: G2D23

View Complete details

get quote request a call back
  • Penny Washers - Special Dimensions
  • Penny Washers - Special Dimensions
Penny Washers - Special Dimensions

Penny Washers - Special Dimensions

Price on Request

Product Brochure

MaterialStainless Steel
Surface FinishNatural
ShapeRound
ColorSelf Colour
Material GradeStainless Steel SS-304 and SS-316

A plain washer is a thin plate, which is most commonly has a disk-shape with a hole in middle. It is widely used to distribute the load of a threaded fastener. Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

The main role of flat washers is to increase the size of a screw’s bearing surface area, and reduce the surface pressure applied on the fastened object.

Looseness can result when the bearing surface sinks under the surface pressure, so using a flat washer to reduce the surface pressure is very effective.

This is especially crucial if the contact area between a screw’s bearing surface and the object being fastened is small when fastening to a slot, for instance, or if the object being fastened is made of soft material such as aluminum or resin.

Special dimensions are available under our Penny Washer Series.

These have a larger outer diameter and are suitable for softer materials.

 

These are available in AISI 304 and AISI 316.



Additional Information:

  • Item Code: B4D49

View Complete details

get quote request a call back
  • Turned Cup Washers
  • Turned Cup Washers
Turned Cup Washers

Turned Cup Washers

Price on Request

Product Brochure

MaterialStainless Steel
Dimension/SizeM3 to M12
Surface FinishNatural
Usage/ApplicationMechanical
Compatible ForUsed with Countersunk Head CSK Screws

We have Turned Cup Washer available in stock.

Cup washers are used in conjunction with countersunk head screws.

These are available in AISI 303 and AISI 316.



Additional Information:

  • Item Code: B3D46

View Complete details

get quote request a call back
Wedge-Lock Washer SS-316L HLS-S

Wedge-Lock Washer SS-316L HLS-S

Price on Request

Product Brochure

Minimum Order Quantity25 Piece
MaterialStainless Steel
Surface FinishNatural
Material GradeAISI 316L
ShapeRound
Packaging TypeBOX
ColorChrome
FeaturesLocking Element
Usage/ApplicationVibration Resistance
Bolted connections tend to work themselves loose under certain operating conditions. Vibrations cause particular problems as they can overpower the “self-locking effect” of bolted connections. This can lead to functional failure or even to the connection coming apart. As it’s not always possible to know what forces are acting on the structure, and as constructional measures cannot be implemented everywhere, securing elements are often used.
One of the few effective securing technologies available is the HEICO-LOCK® wedge locking system, the effectiveness of which has been demonstrated by the latest experimental standards (including DIN 65151, DIN 25201-4, NASM 1312-7).
FUNCTIONAL PRINCIPLE
An important feature of HEICO-LOCK® wedge lock washers, setting them apart from other systems that are available, is the securing of the bolt fastening using preload force rather than friction
Wedge-shaped cams on the inside of the lock washers, radial teeth on the outside
Interlocking embedding of the radial teeth with the respective mating surface   (when tightening the bolted joint)
System movement only possible between the inner wedge shaped cams.   Movement across these wedge shaped surfaces effectively self locks the bolt.
Increase in clamping force.

Certified system for securing bolts, working at low and high preload levels.
Particularly suitable for dynamic loads – including when using lubricants.
Can be re-used.
Very easy to install and remove (wedge lock washers are supplied   as a pre-assembled pair)
Also suitable for high-tensile bolts of 8.8, 10.9 and 12.9 and their respective nuts.
Available in steel or stainless steel with narrow or wide bearing surfaces – other materials are available upon request.
Available from M3 – M76 and ¼” – 3” - custom sizes upon request.
  • Stainless Steel AISI-316L M3 to M48



Additional Information:

  • Item Code: U1D26

View Complete details

get quote request a call back
  • Stamped Cup Washers
  • Stamped Cup Washers
Stamped Cup Washers

Stamped Cup Washers

Price on Request

Product Brochure

MaterialStainless Steel
Dimension/SizeM3 to M12
Surface FinishNatural
Compatible ForUsed with Countersunk Head CSK Screws

We also have Stamped Cup Washer available in stock.

Cup washers are used in conjunction with countersunk head screws.

These are available in AISI 304 and AISI 316.



Additional Information:

  • Item Code: B4D51

View Complete details

get quote request a call back
  • Starlock Push-On Fasteners
  • Starlock Push-On Fasteners
Starlock Push-On Fasteners

Starlock Push-On Fasteners

Price on Request
MaterialCarbon Steel
Starlock fasteners simply push on to a shaft giving an instant fix and grip, thus eliminating costly threading, drilling or grooving operations. Once fixed in position, the push-on fastener is so secure that it cannot be removed without destruction.



Material: Spring Steel
Finest quality high carbon spring steel is specially heat treated to ensure secure holding quality.

Additional Information:

  • Item Code: G1D28

View Complete details

get quote request a call back
  • Fibre Washers Plain
  • Fibre Washers Plain
  • Fibre Washers Plain
Fibre Washers Plain

Fibre Washers Plain

Price on Request

Product Brochure

MaterialFibre
Washer TypePlain Fibre Washer
Inner DiameterM2 (2.2) to M12 (13)
Outer Diameter5mm to 24mm
SizeM2 to M12
ShapeRound
Usage/ApplicationInsulation

A plain washer is a thin plate, which is most commonly has a disk-shape with a hole in middle. It is widely used to distribute the load of a threaded fastener. Plain washers are used to provide a larger bearing surface where screws, bolts and nuts come in contact with the bearing surfaces.

The main role of flat washers is to increase the size of a screw’s bearing surface area, and reduce the surface pressure applied on the fastened object.

Looseness can result when the bearing surface sinks under the surface pressure, so using a flat washer to reduce the surface pressure is very effective.

This is especially crucial if the contact area between a screw’s bearing surface and the object being fastened is small when fastening to a slot, for instance, or if the object being fastened is made of soft material such as aluminum or resin.

We have a range of fibre washers in stock. 
Fibre Washers are useful for weight saving and insulation applications.

Additional Information:

  • Item Code: K1D02

View Complete details

get quote request a call back
Disc Washers DIN 2093 SS 301

Disc Washers DIN 2093 SS 301

Price on Request

Product Brochure

Minimum Order Quantity100 Piece
MaterialStainless Steel
ShapeRound
Surface FinishPassivated
ColorNatural
Corrosion Resistant300 Series SS is resistant to Corrosion
Usage/ApplicationMachine assembly
Known by many different names, this washer is a type of spring shaped like a washer. Disc Washers are loaded in the axial direction, either dynamically or statically. They offer well-developed solutions to many engineering problems. Through a unique combination of high force in a small space, the disc can be used single or arranged in stacks.
Manufactured as per DIN 2093

Additional Information:

  • Item Code: B9D18

View Complete details

get quote request a call back
  • SHIM Rings DIN 988
  • SHIM Rings DIN 988
  • SHIM Rings DIN 988
  • SHIM Rings DIN 988
SHIM Rings DIN 988

SHIM Rings DIN 988

Price on Request

Product Brochure

ApplicationEngineering
MaterialStainless Steel
Material GradeAISI 304
Shim rings are flat washers used in combination when axial clearance must be offset. This could be on a shaft where there is a locking ring/bearing, between which clearance must be offset. By combining washers of different thicknesses you can precisely offset the clearance.
Shims refer to a broad class of specialty flat washers that are used for positioning and spacing. While shims look like flat washers they are different in that shims are typically made  using more precise materials and production techniques.
Axial play resulting from manufacturing tolerances can be rigidly reduced by using various thicknesses of shim washers.

Applications:

  • Compensation for axial play
  • Mechanical engineering
  • Automotive engineering
  • Gear systems
Standard : DIN 988
Material : Stainless Steel AISI 304
Range : 0.1mm to 1mm

Additional Information:

  • Item Code: B4D41

View Complete details

get quote request a call back
Taper Washers Stainless Steel

Taper Washers Stainless Steel

Price on Request
MaterialStainless Steel
GradeSS-304
TypeTaper Washers

 

We hold an expertise hand in wholesaling and retailing Taper Washers of fine quality, which are manufactured using fine grade raw material. They are available in various sizes that suit the requirement of our highly valued clients.

These washers are used to fix screws to the components and are provided at the best rates in the industry. 



Additional Information:

  • Item Code: D42

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES