J. C. Gupta & Sons

Launching our range of Titanium Fasteners, a product of the future.
By exploiting the unique charasteristics of titanium alloys, we bring you fasteners that have extraordinary corrosion resistance, high tensile strength, low weight and non-magnetic properties. based on these excellent characteristics, they find application in aerospace, chemical, defence, robotics, nuclear, marine, petrochemical, racing car and bike bodies and engines, anodising and medical equipment industries.
Get the Titanium Advantage
- Lightweight; Weighs half of stainless steel.
- Non Magnetic; Extremely low magnetism
Non Toxic: Safe for the humann body
Superior corrosion resistance; Excellent resistance to acid-base.

Selection of Titanium Alloys

- Ti-Grade2 Commercially Pure C.P.
This grade of titanium has the highest grade of corrosion resistance. It is used in a broad range of corrosive environments such as salt water, acids, alkalis, and other industrial chemicals.

- Ti-Grade5Ti 6AI-4V
This grade is among the most common grades of titanium. While not as corrosive resistant as the CP grade, it does offer good corrosive resistance. It offers a higher tensile strength compared to the CP grade.

Our Allen Cap range is from M3 to M10 at present.

Additional Information:

• Item Code: R1A01
• Pay Mode Terms: T/T (Bank Transfer)

Launching our range of Titanium Fasteners, a product of the future.
By exploiting the unique charasteristics of titanium alloys, we bring you fasteners that have extraordinary corrosion resistance, high tensile strength, low weight and non-magnetic properties. based on these excellent characteristics, they find application in aerospace, chemical, defence, robotics, nuclear, marine, petrochemical, racing car and bike bodies and engines, anodising and medical equipment industries.
Get the Titanium Advantage
- Lightweight; Weighs half of stainless steel.
- Non Magnetic; Extremely low magnetism
Non Toxic: Safe for the humann body
Superior corrosion resistance; Excellent resistance to acid-base.

Selection of Titanium Alloys

- Ti-Grade2 Commercially Pure C.P.
This grade of titanium has the highest grade of corrosion resistance. It is used in a broad range of corrosive environments such as salt water, acids, alkalis, and other industrial chemicals.

- Ti-Grade5Ti 6AI-4V
This grade is among the most common grades of titanium. While not as corrosive resistant as the CP grade, it does offer good corrosive resistance. It offers a higher tensile strength compared to the CP grade.

Additional Information:

• Item Code: R2A21
• Pay Mode Terms: T/T (Bank Transfer)

Titanium Fasteners – a product of the future.

Titanium fasteners are unique:

Using the unique characteristics of titanium alloys, they have extraordinary corrosion resistance, high tensile strength, low weight and non-magnetic properties.
They find application in aerospace, chemical, defence, robotics, nuclear, marine, petrochemical, racing car and bike bodies and engines, anodising and medical equipment industries.

Get the Titanium Advantage v/s Stainless Steel
– Lightweight; Weighs half of stainless steel.
– Non Magnetic; Extremely low magnetism
– Non Toxic: Safe for the human body
– Superior corrosion resistance; Excellent resistance to acid-base.
Socket CSK Screws are useful where a flush finish is required without any projection.Made as per DIN 7991 or ISO 10642

Additional Information:

• Item Code: R1A05

Get the Titanium Advantage v/s Stainless Steel
– Lightweight; Weighs half of stainless steel.
– Non Magnetic; Extremely low magnetism
– Non Toxic: Safe for the human body
– Superior corrosion resistance; Excellent resistance to acid-base.
The Socket Button Head Screw design is primarily used where a lower profile head is required and for aesthetical reasons.
These screws can take a lower tightening torque as compared to the DIN 912 screws. 

Additional Information:

• Item Code: R1A04

Launching our range of Titanium Fasteners, a product of the future.
By exploiting the unique charasteristics of titanium alloys, we bring you fasteners that have extraordinary corrosion resistance, high tensile strength, low weight and non-magnetic properties. based on these excellent characteristics, they find application in aerospace, chemical, defence, robotics, nuclear, marine, petrochemical, racing car and bike bodies and engines, anodising and medical equipment industries.
Get the Titanium Advantage
- Lightweight; Weighs half of stainless steel.
- Non Magnetic; Extremely low magnetism
Non Toxic: Safe for the humann body
Superior corrosion resistance; Excellent resistance to acid-base.

Selection of Titanium Alloys

- Ti-Grade2 Commercially Pure C.P.
This grade of titanium has the highest grade of corrosion resistance. It is used in a broad range of corrosive environments such as salt water, acids, alkalis, and other industrial chemicals.

- Ti-Grade5Ti 6AI-4V
This grade is among the most common grades of titanium. While not as corrosive resistant as the CP grade, it does offer good corrosive resistance. It offers a higher tensile strength compared to the CP grade.

Additional Information:

• Item Code: R1D06

TITANIUM: STRONGER THAN STEEL, LIGHTER IN WEIGHT.

The titanium fasteners weigh about 60% vis-a-vis stainless steel and have excellent resistance for acid and alkali, as well as low temperature, non-toxicity, and many more advantages.

The CP Grade2 Titanium bolts have high resistance to corrosion and are used extensively due to its durability.

Titanium bolts are also unique in the chemical processing industry for handling Chlorine (wet) and chlorine compounds in aqueous solutions. These bolts are fully resistant to solutions of chlorides, hypochlorites, chlorates, perchlorates and chlorine dioxide. As a result titanium bolts are often using within the chlorine related industries such as pulp and paper and chlor-alkali / bleach.

These bolts provide an excellent solution to prevent seawater corrosion. Because titanium bolts can resist corrosion by seawater up to temperatures as high as 500°F (260°C) as well as survive at ocean depths over a mile below the surface, they are used throughout the oil & gas, desalination and marine industries.

Our range extends from M3 to M16 up to 150mm length.

Additional Information:

• Item Code: R1A21
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Bengaluru

TITANIUM: STRONGER THAN STEEL, LIGHTER IN WEIGHT.

The titanium fasteners weigh about 60% vis-a-vis stainless steel and have excellent resistance for acid and alkali, as well as low temperature, non-toxicity, and many more advantages.

We offer titanium flat washers to meet customer's needs.
These washers provide an excellent solution to products exposed to dangers of seawater corrosion. As they can resist corrosion by seawater up to high temperatures such as 500°F (260°C) and survive over a mile below the ocean surface, they are used throughout the oil & gas, desalination and marine industries.

Specifications:

• Standard: DIN 125
• Material: CP Titanium Grade1/Grade2, Titanium Alloy Grade5/Grade7, β Alloy. (The most common used grades of Titanium washers are Grade 2 and Grade 5)
• Size: M3 - M20.

Launching our range of Titanium Fasteners, a product of the future.
By exploiting the unique charasteristics of titanium alloys, we bring you fasteners that have extraordinary corrosion resistance, high tensile strength, low weight and non-magnetic properties. based on these excellent characteristics, they find application in aerospace, chemical, defence, robotics, nuclear, marine, petrochemical, racing car and bike bodies and engines, anodising and medical equipment industries.
Get the Titanium Advantage
- Lightweight; Weighs half of stainless steel.
- Non Magnetic; Extremely low magnetism
Non Toxic: Safe for the humann body
Superior corrosion resistance; Excellent resistance to acid-base.

Selection of Titanium Alloys

- Ti-Grade2 Commercially Pure C.P.
This grade of titanium has the highest grade of corrosion resistance. It is used in a broad range of corrosive environments such as salt water, acids, alkalis, and other industrial chemicals.

- Ti-Grade5Ti 6AI-4V
This grade is among the most common grades of titanium. While not as corrosive resistant as the CP grade, it does offer good corrosive resistance. It offers a higher tensile strength compared to the CP grade.

We now have Washers in ready stock.

Additional Information:

• Item Code: R1D02
• Pay Mode Terms: T/T (Bank Transfer)

TITANIUM: STRONGER THAN STEEL, LIGHTER IN WEIGHT.

The titanium fasteners weigh about 60% vis-a-vis stainless steel and have excellent resistance for acid and alkali, as well as low temperature, non-toxicity, and many more advantages.

Titanium nuts are known for being strong, lightweight and corrosion resistant. They have the highest strength-to-weight ratio as compared to other materials.

In comparison to SS 316, Grade 5 Titanium is 4 times stronger and is about half the weight; making it ideal for military usage and sporting products.

Our nuts conform to DIN 934 standards.

Additional Information:

• Item Code: R1C31

Launching our range of "TITAN" brand, Titanium Fasteners, a product of the future.
By exploiting the unique charasteristics of titanium alloys, we bring you fasteners that have extraordinary corrosion resistance, high tensile strength, low weight and non-magnetic properties. Based on these properties, they find application in aerospace, chemical, defence, robotics, nuclear, marine, petrochemical, racing car and bike bodies and engines, anodising and medical equipment industries.
Get the Titanium Advantage
- Lightweight; Weighs half of stainless steel.
- Non Magnetic; Extremely low magnetism
- Non Toxic: Safe for the humann body
- Superior corrosion resistance; Excellent resistance to acid-base.

Additional Information:

• Item Code: R1-R2