J. C. Gupta & Sons

We are offering dome bolts. This type of bolt design has a lot of Architectural applications.
Giving a pleasing dome head look these bolts will plug a hole effectively.
Available in Stainless Steel AISI-304 grade.
Sizes : M4 to M10

 

Additional Information:

• Item Code: B4A32

We offer a high quality range of Hex Bolts. 
Specifications:

• Metric Series: IS 1364, ISO 4014, DIN 931
• Materials: Alloy Steel (high tensile), mild steel, Brass and stainless steel (aisi 304 and 316)
• Mechanical: For alloy steel property class 8.8 and 10.9 as per IS 1367, ISO 898 part I
• For mild steel 4.6 class
• Size Range : (M3), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), (M30), (M33), (M36). Lengths from 10mm to 400mm
• Sizes in brackets are non-preferred standards and availability is limited

• Inch Series
• BSW: BS:
• Threads: BS whitworth, BS 84
• Materials: Alloy Steel (high tensile), mild steel and stainless steel aisi 304
• Mechanical: BS 2470 for alloy steel
• Size range: (1/8”), 3/16”, ¼”, 5/16”. 3/8”, (7/16”), ½”, 5/8”, 3/4”, (7/8”), (1”). Lengths 3/8” to 8”
• Sizes in brackets are non-preferred standards and availability is limited

Additional Information:

• Item Code: A22

Amidst our wide range of products, we are offer superior quality Hex Screws. This workhorse of the Fastener industry is manufactured in a number of materials and finishes.
Specifications:

Metric Series:

• IS 1364, ISO 4014, DIN 931/933
• Materials: Alloy Steel (high tensile), mild steel, Brass and stainless steel (aisi 304 and 316)
• Mechanical: For alloy steel property class 8.8 and 10.9 as per IS 1367, ISO 898 part I.
• For mild steel 4.6 class
• Size Range : (M3), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), (M30), (M33), (M36). Lengths from 10mm to 400mm
• Sizes in brackets are non-preferred standards and availability is limited

Inch Series

• BSW: BS:
• Threads: BS whitworth, BS 84
• Materials: Alloy Steel (high tensile), mild steel and stainless steel aisi 304
• Mechanical: BS 2470 for alloy steel
• Size range:(1/8”), 3/16”, ¼”, 5/16”. 3/8”, (7/16”), ½”, 5/8”, 3/4”, (7/8”), (1”). Lengths 3/8” to 8”
• Sizes in brackets are non-preferred standards and availability is limited

Additional Information:

• Item Code: A21

These swing bolts are used extensively in Jigs and Fixtures.
They are manufactured as per DIN 444 and are not recommended for lifting applications.
Being manufactured from stainless steel they are ideal both for use in the food and pharmaceutical industries and their associated processing and packaging and also for challenging conditions.

Additional Information:

• Item Code: B4A48

CD Studs, or Capacitor Discharge Weld Studs, are mainly used in sheet metal applications. Where a fabricator may drill a hole to insert a bolt for an attachment point, a CD Stud can be shot to the attachment side with no reverse side marking or bolt head. This leaves a clean and well finished look to the product with no compromise in quality or strength and achieves a significant time and cost savings.
CD (capacitor discharge) stud welders utilize a capacitor storage system to produce a rapid electrical discharge, resulting in fast, high-integrity welds, even on thin-gauge materials. In contrast to arc welds, CD welds do not require ceramic ferrules or gas. The direct-current arc creates a shorter weld time, renders oxidation and heat concentration provided by ferrules and fluxes unnecessary.
These are suitable for use with Stud Welding Machines.
Our range of CD Weld Studs are as per DIN 32501/3 or ISO 13918.
Sizes
M3 to M8 upto 50mm length

Additional Information:

• Item Code: B4E21
• Delivery Time: EX STOCK

As per the variegated requirements of our clients, we are offering a wide gamut of Lag Bolts Screws. This bolt screw is accessible from us in numerous specifications to choose from. The given bolt screw is stringently tested on varied predefined parameters for dispatching a defect free range. Our given bolt screw is manufactured from excellent quality material & contemporary techniques at par with set norms.

Features:

• Abrasion resistance
• Well designed
• Longer service life

Specifications:

• Materials: Mild Steel and Stainless Steel
• Size Range: 5mm to 12mm diameters and 20mm to 150mm length
• Sizes in brackets are non-preferred standards and availability is limited
• Typical Uses: Fixing clamps, plates to flooring, walls etc. Fixing Dish Antennas, road humps etc

Additional Information:

• Item Code: A2B58

This is a type of fastener designed to be tightened and loosened by hand.  Wing screws have a wing-like projection from the head of the screw, ideal for thumb and forefinger leverage in turning. Ensures rapid assembly and disassembly using only your hand.Wing screws and other hand fasteners are easy to install and make adjustments simple. They’re ideal for applications where frequent access is require or where tightness needs to be adjusted regularly.
Available in Stainless Steel from M3 to M10.

Additional Information:

• Item Code: B4A37

An eyebolt, also known as a lifting eye or eyelet, is a bolt with a loop at one end. The eye bolt has a threaded shank or rod which is securely screwed into a structure. Once the bolt is secured in place, ropes or cables can be anchored to or fed through the protruding loop. Heavy-duty eyebolts can be used in rigging for lifting heavy loads, smaller eyebolts can be used for tensioning wires, securing loads and in other non-load bearing applications.

Types of Eyebolt
Forged: These eyebolts are forged as one piece rather than formed and have a continuous eye and shoulder. This design enables them to be used for heavier loads.
Plain or Regular: These eyebolts are used for vertical loading only and are not recommended for angular lifting. They can also be used with tie downs to secure loads and as wire guides
Collared: Collared or shouldered eyebolts are fully threaded and reinforced with a collar or shoulder. When installed the shoulder sits flush with the mounted surface and offers more stability to the base of the eye and prevents bending and deforming. This design means that these eyebolts can be used for angular loads of up to 45°.
Commercial or Load Rated: These eyebolts are designed for use in lightweight non-load bearing applications such as securing ropes or cables to posts and are not used to lift or suspend an object. Load rated eye bolts often have embossed stamping on the body of the eye bolt stating the working load limit (WLL), batch number and thread size.
Machinery: Machinery eye bolts are forged and shouldered and have threads with a high holding strength. These eyebolts have a heavy-duty design and are made to high specifications and standards. Applications include connection points in rigging applications and, due to their shouldered design, can be used to angled loads

Our lifting eye bolts correspond to standard sheet DIN 580.

The following guideline of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the datasheets.

The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.

Material – Stainless Steel AISI-304

Size Range – M6 to M36

 

Additional Information:

• Item Code: B4A46

For your machine clamping requirements we have a good range of T-Slot Bolts.

Material - Alloy Steel Hardened and Tempered.
Standards - DIN 787 IS-2015

Additional Information:

• Item Code: C2A25

Being the most respected organization guided by experienced and knowledgeable professionals, we are offering Square Neck Carriage Bolts. These carriage bolts are expertly manufactured keeping in mind with quality norms using top grade material, under the keen observation of experienced professionals. The given carriage bolts are accessible in different specifications as per the variegated needs of customers. Our esteemed clients can avail these carriage bolts from us at reasonable rates.

Features:

• Precisely engineered
• Less maintenance
• Durable in nature

Other Details:

• Materials: Mild Steel and Stainless Steel
• Size Range: m5 to m12
• Typical Uses: Fixing Wooden Gates, door locks, security fixings, wood to steel applications

Additional Information:

• Item Code: A20
• Delivery Time: Ex. Stock. Else 30 days

The Lifting Eye Bolt DIN 444 DIN 580 is a very specialized industrial product given its applications in several industrial units of different nature. This is a very versatile bolt. This galvanized steel bolt is manufactured and traded by us. As it transfers the weight at a very crucial place our team of experts see to it that it performs most efficiently at crucial juncture without any problem causing to the machine.

 

 

Additional Information:

• Item Code: A2A46

The HSFG Structural Bolts, otherwise known as high strength friction grip (HSFG) bolts are specially designed products being retailed by us. We cater to the necessity of the client. Since this bolt is known to transfer the load by causing friction they are built with special care by looking into the prescribed designs. The basic advantages of our HSFG bolts are the greater firmness and the capability to endure sporadic forces.

 

Additional Information:

• Item Code: C2A30