J. C. Gupta & Sons

We are manufacturing and supplying a wide gamut of Clinch Nuts Stainless Steel. Our provided clinch nut is well known in the industry for its optimum quality. The provided clinch nut is well checked on numerous parameters before supplying in the market. This clinch nut is manufactured as per the set industry norms using best in class material & modern techniques following the set norms of industry.

Features:

• Simple installing
• Premium quality
• Perfect finish

Additional Information:

• Item Code: 400SeriesSPB7C39

Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet

Self-Clinching Nuts provide strong reusable female threads in panels that are too thin to be conventionally tapped. Utilising a special proven clinch feature, this fastener has excellent torque-out and push-out characteristics whilst providing a flush finish on the underside of the panel. Like all self clinching fasteners they are installed using a parallel squeezing force so require access to both sides of the panel.
Sizes: M2 to M10. 4-40UNC to 1/4-20UNC.

Additional Information:

• Item Code: A2C39

Self-clinching nuts are installed by placing them in properly sized holes in sheets and applying a parallel squeezing force to the head of the nut. The sheet metal surrounding the head cold flows into an undercut thereby making the fastener an integral part of the sheet

Self-Clinching Nuts provide strong reusable female threads in panels that are too thin to be conventionally tapped. Utilising a special proven clinch feature, this fastener has excellent torque-out and push-out characteristics whilst providing a flush finish on the underside of the panel. Like all self clinching fasteners they are installed using a parallel squeezing force so require access to both sides of the panel.
Sizes: M2 to M10. 4-40UNC to 1/4-20UNC.

Additional Information:

• Item Code: B4C39

 

If you have a need for an industrial fastener that, after installation, will be completely flush with its surrounding surface, then the self-clinching flush nut should be your fastener of choice.

These fasteners are ideal for applications where a thin sheet requires load-bearing threads but still must remain smooth, with no protrusions on either surface. This can provide strong threads in places which would be inaccessible for installation after chassis are formed.

 

 Utilising a special proven clinch feature, this fastener has excellent torque-out and push-out characteristics whilst

 

providing a flush finish on both sides of the panel. The hexagonal head ensures high axial and torsional strength.

 

 Like all self-clinching fasteners they are installed using a parallel squeezing action, so require access to both sides

 

of the panel.

 

Flush Nuts are available in various thread sizes, manufactured from 300 series stainless steel and are suitable for installation in ductile steel and aluminium panels with a recommended maximum hardness of 70 HRB

 

 

 

 

 

 

    

     

Additional Information:

• Item Code: B4C71

Self-Clinching fasteners provide strong load bearing male or female threads in thin steel and aluminium panels.   Installation is neat and easy, simply locate the fastener into a pre- prepared hole and apply a parallel squeezing force to embed the fastener into the panel.   Self-Clinching fasteners work by utilizing a special clinch feature. When the part is pressed into the hole,  the parent material cold-flows into the clinch feature, effectively locking the fastener into the panel, providing excellent torque-out and push-out performance. Self-Clinching fasteners require a parallel squeezing force to be applied for correct installation. Equally important is the length of time the force is applied. Sufficient time must be allowed for the cold-flow clinching process to work (this is often referred to as the dwell time when installing on a hydraulic press).

A self clinching stud is designed to become a permanent fixture of the part, component, or device onto which it’s installed. Installation is usually performed during the initial fabrication stage or in final assembly of the metal chassis. Parallel squeezing force is applied in order to secure the stud to the sheet metal panel.

These externally threaded fasteners become permanently mounted to a metal framework, reducing costs and assembly time by eliminating the necessity for loose hardware and additional installation processes. Self clinching studs are used for varying purposes, though all varieties are built to withstand high levels of torque, heavy weights, and constant, repeated pull by the attached components.

Additional Information:

• Item Code: A2E15

A Self-Clinching Standoff provides an excellent solution for mounting, spacing and stacking of boards and panels.

 

They provide strong captivated reusable female threads in a spacer format in thin sheets.  Utilising a hexagon head and a clinch feature, this fastener has excellent torque-out, pull-through  and push-out characteristics whilst providing a flush finish on the underside of the panel, requiring minimal  surface finishing after installation. They are installed using a parallel squeezing action, so require access to both sides of  the panel.  

Ease of assembly and quick removal are major reasons to specify Clinch Stndoffs. They satisfy many functional and cosmetic requirements.

Additional Information:

• Item Code: B4C13
• Pay Mode Terms: T/T (Bank Transfer)

Self-Clinching fasteners provide strong load bearing male or female threads in thin steel and aluminium panels.   Installation is neat and easy, simply locate the fastener into a pre- prepared hole and apply a parallel squeezing force to embed the fastener into the panel.   Self-Clinching fasteners work by utilizing a special clinch feature. When the part is pressed into the hole,  the parent material cold-flows into the clinch feature, effectively locking the fastener into the panel, providing excellent torque-out and push-out performance. Self-Clinching fasteners require a parallel squeezing force to be applied for correct installation. Equally important is the length of time the force is applied. Sufficient time must be allowed for the cold-flow clinching process to work (this is often referred to as the dwell time when installing on a hydraulic press).

A self clinching stud is designed to become a permanent fixture of the part, component, or device onto which it’s installed. Installation is usually performed during the initial fabrication stage or in final assembly of the metal chassis. Parallel squeezing force is applied in order to secure the stud to the sheet metal panel.

These externally threaded fasteners become permanently mounted to a metal framework, reducing costs and assembly time by eliminating the necessity for loose hardware and additional installation processes. Self clinching studs are used for varying purposes, though all varieties are built to withstand high levels of torque, heavy weights, and constant, repeated pull by the attached components.

Additional Information:

• Item Code: B4A15

A Self-Clinching Standoff provides an excellent solution for mounting, spacing and stacking of boards and panels.

 

They provide strong captivated reusable female threads in a spacer format in thin sheets.  Utilising a hexagon head and a clinch feature, this fastener has excellent torque-out, pull-through  and push-out characteristics whilst providing a flush finish on the underside of the panel, requiring minimal  surface finishing after installation. They are installed using a parallel squeezing action, so require access to both sides of  the panel.  

Ease of assembly and quick removal are major reasons to specify Clinch Stndoffs. They satisfy many functional and cosmetic requirements.

Additional Information:

• Item Code: A2C14

A Self-Clinching Standoff provides an excellent solution for mounting, spacing and stacking of boards and panels.

 

They provide strong captivated reusable female threads in a spacer format in thin sheets.  Utilising a hexagon head and a clinch feature, this fastener has excellent torque-out, pull-through  and push-out characteristics whilst providing a flush finish on the underside of the panel, requiring minimal  surface finishing after installation. They are installed using a parallel squeezing action, so require access to both sides of  the panel.  

Ease of assembly and quick removal are major reasons to specify Clinch Stndoffs. They satisfy many functional and cosmetic requirements.

Additional Information:

• Item Code: B4C14

A Self-Clinching Standoff provides an excellent solution for mounting, spacing and stacking of boards and panels.

 

They provide strong captivated reusable female threads in a spacer format in thin sheets.  Utilising a hexagon head and a clinch feature, this fastener has excellent torque-out, pull-through  and push-out characteristics whilst providing a flush finish on the underside of the panel, requiring minimal  surface finishing after installation. They are installed using a parallel squeezing action, so require access to both sides of  the panel.  

Ease of assembly and quick removal are major reasons to specify Clinch Stndoffs. They satisfy many functional and cosmetic requirements.

 

 

Additional Information:

• Item Code: A2C13
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Bengaluru

Self Clinching Blind Fasteners are used in applications requiring closed end threads.

They can be easily installed into correct sized holes with a standard press applying squeezing force between parallel surfaces.

These nuts provide a permanent blind thread in thin metal sheets.

Advantages

• Provide barrier against foreign matter
• Limits screw penetration thereby protecting internal components
• A sealing effect is achieved

Additional Information:

• Item Code: B4C72